Sharp XV-Z7000E operation manual Auto Sync Adjustment, On-screen Display

Page 26

Computer Image Adjustments (INPUT 2 (RGB) mode only)

Remote control

 

RGB/

INPUT 1

COMPONENT PICT MODE

INPUT 2

AUTO SYNC GAMMA

 

1

S-VIDEO

CLR TEMP

VIDEO

KEYSTONE FREEZE

Auto Sync Adjustment

•Used to automatically adjust a computer image.

•Auto Sync adjustment can be made manually by pressing AUTO SYNC.

•The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed.

1Press AUTO SYNC on the remote control.

On-screen Display

During Auto Sync adjustment, “Adjusting The Image”

 

is displayed as shown on the left.

 

 

• Auto Sync adjustment may take some time to complete,

 

depending on the image of the computer connected to the

 

projector.

 

• When the optimum image cannot be achieved with Auto

 

Sync adjustment, use manual adjustments. (See page 27.)

 

 

Operation

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents English Precautions a Observer Lors DU Important Safeguards Outstanding Features Widescreen ImagesContents Lamp Monitor Function Temperature Monitor FunctionUsage Guidelines AUT I O NProjector Lamp ReplacementPart Names RCA Audio InputPart Names Remote ControlInserting the Batteries RGB/COMPONENTPositioning the Remote Control Attaching the Rubber Leg TipsSetup & Connections Supplied AccessoriesConnecting the Projector to Audiovisual Equipment Connecting the ProjectorConnecting the Power Cord ProjectorDTV decoder DVD player DTV decoderConnecting other compatible computers Connecting the Projector to a ComputerConnecting the Projector Plug and Play functionConnecting RS-232C Port ProjectorBasic Operations Maintenance indicatorsProjector Remote control Startup imageBasic Operations 5INPUT 1 Mode Input 2 ModeVideo Mode Press INPUT, Input 1, Input 2, S-VIDEO orFull Mode Setting up the ScreenStandard Setup Front Projection Wide Mode Normal ModeCeiling-mount Setup Using the Adjustment FeetReversed Image Setup Digital Keystone Correction Using the Keystone buttonsUsing the GUI menu GUI On-screen DisplayUsing the GUI Graphical User Interface Menu Screens Main menu Sub menu Main menuPAL Selecting the On-screen Display Language Description of Adjustment Items Picture AdjustmentsAdjusting the Picture Picture Adjustments Selecting the Signal TypeProgressive Mode GUI On-screen Display Projector Remote ControlAuto Sync Adjustment On-screen DisplayAdjusting the Computer Image Computer Image Adjustments Input 2 RGB mode onlyUseful Features Freeze FunctionAdjusting the Colour Temperature Description of Colour TemperatureGamma Correction Gamma ModesVGA Selecting the Picture Display ModeInput Signal Output screen image Svga XGA SxgaAutomatic Power Shutoff Function Description of Automatic Power ShutoffDescription of Background Images Theatre Mode FunctionSelecting a Background Image Description of Theatre ModesDescription of Projected Images Special Mode AdjustmentReverse/Invert Image Function Air Filter Maintenance Cleaning the air filterRemove the filter cover Remove the air filter Condition Problem Possible Solution Lamp/Maintenance IndicatorsMaintenance Indicators LampReplacing the Projection Lamp Removing and installing the lamp unitCord.Disconnect the power First Change Filter StepsPress Pict Mode and Menu on Resetting the lamp timerPress Input and Pict Mode on Replacing the Projection LampUsing the Kensington Lock TroubleshootingAppendix Attaching the Lens CapComputer Input Pin No Signal Name ReferenceConnection Pin Assignments GNDCommunication conditions RS-232C Port SpecificationsPC control Basic formatRS-232C Port Specifications Commands When Bright of RGB Image Adjustment is set to 10Computer Compatibility Chart Specifications Dimensions Units mmGlossary
Top Page Image Contents