Seiko Group 201 installation manual Self Test, Check Items of Self test, Performing Self test

Self Test

The DM-D500 has a self test function. If you want to perform a self test, you must change the setting of the DIP switch.

Check Items of Self test

The following items are checked during the self test:

❏Control ROM version

❏DIP switch settings

❏Example of display characters

❏Example of each function, such as brightness, flashing, and scroll

Performing Self test

To perform the self test, follow the steps below.

1.Turn off the power for the DM-D500.

2.Set the SW 2-2 of the DIP switch 2 to ON, and turn on the power.

Note:

If the contents of the self test are not displayed, the DM-D500 may be malfunctioning. Please contact your DM-D500 dealer for assistance.

When the self test is finished and no error occurs, the cursor is displayed at the home position; then the DM-D500 is ready to receive data.

36