Sharp XV-Z200E operation manual Keystone Correction, To return to the normal screen Press again

Page 35

Keystone Correction

This function can be used to adjust the Key- stone settings.

Note

•For details about using the menu screen, see pages 38 to 41.

1 Press on the projector or on the remote control.

2 Press / to select “H Key- stone” or “V Keystone”.

Selected Item

Description

H Keystone

Horizontally adjusts the keystone settings.

V Keystone

Vertically adjusts the keystone settings.

Reset

V and H Keystone adjustments are

 

returned to the factory preset settings.

3 Press / to move the mark on the selected adjustment item to the desired setting.

Note

•Straight lines and the edges of the displayed image may appear jagged, when adjusting the Key- stone setting.

•When adjusting “H Keystone” and “V Keystone” at the same time, the values of adjustable angles for each setting become smaller.

•The adjustable value of the “V Key- stone” becomes extremely small when “H Keystone” is made to be the maximum value.

•Keystone correction is disabled while the picture mode is set to “SMART STRETCH”. (See page 35.)

4 To return to the normal screen,

press again.

KEYSTONE button

", ',\,

buttons

KEYSTONE button

", ',\,

buttons BasicOperation

Horizontal Keystone Correction

Vertical Keystone Correction

-33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents XV-Z200E Special Note for Users in the U.K Introduction Lamp Replacement Contents Important Safeguards Introduction Important Safeguards Required equipments Quick GuideProjector Side and Rear View Part NamesProjector Front and Top View Projector Rear View Using the Terminal CoverPart Names Remote Control Front ViewRemote Control Top View Insert the included batteries Operating the Remote ControlAvailable Range of the Remote Control Inserting the BatteriesPower cord AccessoriesConnections and Setup This projector can be connected to Connecting the Projector to Other DevicesBefore Connecting Connecting the Power CordConnecting to Video Equipment Using an S-video Cable Input Connecting to Video EquipmentConnect the composite video cable to the video equipment Connect a composite video cable to the projectorConnect a component cable to the projector Connecting to a DVD Player and DTV DecoderConnect the above cable to the video equipment Connect a DVI to 15-pin D-sub adaptor to the projectorOptional Accessory Connecting to a Computer Digital Input Connecting to a com- puter with Digital RGB output TerminalControlling the Projector by a Computer Controlling Projector Using an RS-232C CableLock the lever on the Swivel Stand SetupUsing the Swivel Stand Removing the Swivel StandProjected Image Focusing and ZoomingUsing the Lens Shift Attaching the Swivel StandWhen using a normal screen Adjusting the Projection DistanceUpper and Lower Lens Shift Position Rear Projection Image ProjectionBasic Operation Image Projection Basic ProcedurePlug the power cord into the wall outlet Press on the remote control or on the projectorAbout the Input modes Selecting the On- screen Display Lan- guageTurning the Power off To return to the normal screen Press again Keystone CorrectionScreen area Press Adjusting the Picture Aspect RatioFreezing a Moving Image Side BAR Smart Stretch Cinema Zoom Adjustments and Settings Menu Selections Adjustments Using the Menu ScreenPress \ or to display the other menu screens Press or to select the item you want to adjustPress \ or to adjust the item selected Other menu screens Menu Selections SettingsPress \ or to display Press or to select the item you want to set Menu Bar Items Input 1 / 2 / Digital Input ModeInput 3 / 4 Mode Adjusting Image Prefer- ences Adjusting the PicturePress or to fine adjust the colour temperature Adjusting the Colour TemperatureEmphasizing Contrast Gamma Correction FunctionStoring the Adjustment Values for Each Memory Number Picture Setting FunctionWhen Auto Sync is OFF Adjusting the Computer and DVD/DTV ImagesSpecial Modes Adjust- ment Checking the Input Signal Auto Sync AdjustmentTurning on/off the On- screen Display Using the Options MenuChecking the Lamp Life Status Using the Options Menu Selecting the Signal TypeSetting the Video Signal Video menu only Selecting a Background Image Setting the Eco ModeSelecting the Menu Screen Position Automatic Power Shut- off FunctionSelecting the Menu Colour Reversing/Inverting Projected Images Setting the Projection ModeAppendix About the temperature warning indicator Maintenance IndicatorsReplacing the Lamp Regarding the LampLamp Remove the Swivel Stand. See Remove the lamp unit cover Removing and Install- ing the Lamp UnitPut the projector into the standby mode Unplug the power cordInsert the new lamp unit Resetting the Lamp TimerPlug the power cord Reset the lamp timerCleaning Ventilative Holes Cleaning the Ventilative HolesTroubleshooting Using the Kensington LockDVI-I Input 2 / Digital Input port 29 pin connector Connecting Pin AssignmentsCommunication conditions RS-232C Specifications and Command SettingsCommands PC controlComputer Compatibility Chart PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsDimensions Aspect Ratio GlossaryDVI IndexSharp Corporation

XV-Z200E specifications

The Sharp XV-Z200E is an innovative and highly regarded multimedia projector designed for both home entertainment enthusiasts and professional presentations. Renowned for its advanced features and cutting-edge technology, the XV-Z200E stands out for its exceptional image quality and versatility.

One of the primary attributes of the XV-Z200E is its impressive native resolution of 1280 x 720 pixels, which supports high-definition content. This resolution allows users to enjoy vivid and sharp images, making it ideal for watching movies, gaming, or delivering impactful presentations. Furthermore, the projector boasts a bright luminosity of up to 2000 ANSI lumens, ensuring clear visibility even in ambient light conditions.

The XV-Z200E employs DLP (Digital Light Processing) technology, which is known for its reliability and ability to produce high-quality images with rich colors and deep contrasts. The color wheel within the projector enhances its capability to reproduce a wider spectrum of colors, resulting in a more immersive viewing experience. Additionally, the high contrast ratio of 2500:1 means that users can expect deeper blacks and brighter whites, generating a more dynamic image overall.

Portability is another significant feature of the Sharp XV-Z200E. Weighing approximately 2.7 kilograms, it is lightweight and compact, making it easy to transport for business trips or gatherings. The projector also includes a variety of connectivity options, including HDMI and VGA inputs, which makes it compatible with a broad range of devices such as laptops, DVD players, and gaming consoles.

For user convenience, the XV-Z200E is equipped with an intuitive interface, facilitating easy setup and operation. The built-in speaker provides adequate sound quality for small to medium-sized rooms, although users have the option to connect external audio systems for enhanced sound experiences.

In conclusion, the Sharp XV-Z200E combines advanced DLP technology with high brightness and resolution to offer an exceptional viewing experience. Its portability and multiple connectivity options make it suitable for various environments, from personal use at home to professional presentations in business settings. With its blend of performance and user-friendly features, the XX-Z200E remains a compelling choice for anyone in search of a reliable and high-quality projector.
Top Page Image Contents