Sharp XV-Z200E Automatic Power Shut- off Function, Selecting the Menu Screen Position

Page 56

Using the “Options” Menu

On-screen Display

Automatic Power Shut- off Function

When no input signal is detected for more than 15 minutes, the projector will automatically en- ter the standby mode if set to “” (ON).

Select “Auto Power Off” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

 

 

Projector automatically enters the standby mode after 15 minutes without an input signal.

Automatic Power Shut-off disabled.

Note

•“Auto Power Off” is factory preset to “”.

•When the Auto Power Off function is set to

“ (ON)”, 5 minutes before the projector enters the standby mode, the message “En- ter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

On-screen Display

Selecting the Menu

Screen Position

This function allows you to select the desired position of the menu screen.

Select “Menu Position” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 38 to 41.

Selected Item

Description

 

 

Center

The menu is displayed on the

 

center of the image.

Upper

The menu is displayed on the

Right

upper right of the image.

Lower

The menu is displayed on the

Right

lower right of the image.

Upper

The menu is displayed on the

Left

upper left of the image.

Lower

The menu is displayed on the

Left

lower left of the image.

 

 

-54

Page 55 Page 57
Image 56
Page 55 Page 57
Contents XV-Z200E Special Note for Users in the U.K Introduction Lamp Replacement Contents Important Safeguards Introduction Important Safeguards Quick Guide Required equipmentsProjector Side and Rear View Part NamesProjector Front and Top View Using the Terminal Cover Projector Rear ViewPart Names Remote Control Front ViewRemote Control Top View Operating the Remote Control Available Range of the Remote ControlInserting the Batteries Insert the included batteriesAccessories Power cordConnections and Setup Connecting the Projector to Other Devices Before ConnectingConnecting the Power Cord This projector can be connected toConnecting to Video Equipment Connecting to Video Equipment Using an S-video Cable InputConnect a composite video cable to the projector Connect the composite video cable to the video equipmentConnecting to a DVD Player and DTV Decoder Connect a component cable to the projectorConnect a DVI to 15-pin D-sub adaptor to the projector Connect the above cable to the video equipmentOptional Accessory Connecting to a Computer Connecting to a com- puter with Digital RGB output Terminal Digital InputControlling Projector Using an RS-232C Cable Controlling the Projector by a ComputerSetup Using the Swivel StandRemoving the Swivel Stand Lock the lever on the Swivel StandFocusing and Zooming Using the Lens ShiftAttaching the Swivel Stand Projected ImageAdjusting the Projection Distance When using a normal screenUpper and Lower Lens Shift Position Image Projection Rear ProjectionBasic Operation Basic Procedure Plug the power cord into the wall outletPress on the remote control or on the projector Image ProjectionSelecting the On- screen Display Lan- guage About the Input modesTurning the Power off Keystone Correction To return to the normal screen Press againScreen area Press Adjusting the Picture Aspect RatioFreezing a Moving Image Side BAR Smart Stretch Cinema Zoom Adjustments and Settings Using the Menu Screen Menu Selections AdjustmentsPress \ or to display the other menu screens Press or to select the item you want to adjustPress \ or to adjust the item selected Other menu screens Menu Selections SettingsPress \ or to display Press or to select the item you want to set Input 1 / 2 / Digital Input Mode Menu Bar ItemsInput 3 / 4 Mode Adjusting the Picture Adjusting Image Prefer- encesAdjusting the Colour Temperature Press or to fine adjust the colour temperatureGamma Correction Function Emphasizing ContrastPicture Setting Function Storing the Adjustment Values for Each Memory NumberAdjusting the Computer and DVD/DTV Images When Auto Sync is OFFSpecial Modes Adjust- ment Auto Sync Adjustment Checking the Input SignalTurning on/off the On- screen Display Using the Options MenuChecking the Lamp Life Status Using the Options Menu Selecting the Signal TypeSetting the Video Signal Video menu only Setting the Eco Mode Selecting a Background ImageAutomatic Power Shut- off Function Selecting the Menu Screen PositionSelecting the Menu Colour Setting the Projection Mode Reversing/Inverting Projected ImagesAppendix Maintenance Indicators About the temperature warning indicatorReplacing the Lamp Regarding the LampLamp Removing and Install- ing the Lamp Unit Put the projector into the standby modeUnplug the power cord Remove the Swivel Stand. See Remove the lamp unit coverResetting the Lamp Timer Plug the power cordReset the lamp timer Insert the new lamp unitCleaning the Ventilative Holes Cleaning Ventilative HolesUsing the Kensington Lock TroubleshootingConnecting Pin Assignments DVI-I Input 2 / Digital Input port 29 pin connectorRS-232C Specifications and Command Settings CommandsPC control Communication conditionsComputer Compatibility Chart Specifications PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSCDimensions Glossary Aspect RatioIndex DVISharp Corporation

XV-Z200E specifications

The Sharp XV-Z200E is an innovative and highly regarded multimedia projector designed for both home entertainment enthusiasts and professional presentations. Renowned for its advanced features and cutting-edge technology, the XV-Z200E stands out for its exceptional image quality and versatility.

One of the primary attributes of the XV-Z200E is its impressive native resolution of 1280 x 720 pixels, which supports high-definition content. This resolution allows users to enjoy vivid and sharp images, making it ideal for watching movies, gaming, or delivering impactful presentations. Furthermore, the projector boasts a bright luminosity of up to 2000 ANSI lumens, ensuring clear visibility even in ambient light conditions.

The XV-Z200E employs DLP (Digital Light Processing) technology, which is known for its reliability and ability to produce high-quality images with rich colors and deep contrasts. The color wheel within the projector enhances its capability to reproduce a wider spectrum of colors, resulting in a more immersive viewing experience. Additionally, the high contrast ratio of 2500:1 means that users can expect deeper blacks and brighter whites, generating a more dynamic image overall.

Portability is another significant feature of the Sharp XV-Z200E. Weighing approximately 2.7 kilograms, it is lightweight and compact, making it easy to transport for business trips or gatherings. The projector also includes a variety of connectivity options, including HDMI and VGA inputs, which makes it compatible with a broad range of devices such as laptops, DVD players, and gaming consoles.

For user convenience, the XV-Z200E is equipped with an intuitive interface, facilitating easy setup and operation. The built-in speaker provides adequate sound quality for small to medium-sized rooms, although users have the option to connect external audio systems for enhanced sound experiences.

In conclusion, the Sharp XV-Z200E combines advanced DLP technology with high brightness and resolution to offer an exceptional viewing experience. Its portability and multiple connectivity options make it suitable for various environments, from personal use at home to professional presentations in business settings. With its blend of performance and user-friendly features, the XX-Z200E remains a compelling choice for anyone in search of a reliable and high-quality projector.
Top Page Image Contents