Sharp XV-Z200E operation manual Specifications, PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC

Page 69

Specifications

Product type

Projector

Model

XV-Z200E

Video system

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43

 

DTV 480I/480P/720P/1080I

Display method

DLP chip, RGB optical shutter method

DLP panel

Panel size: 0.6

 

Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments

 

Drive method: Digital Light Processing (DLP™)

 

No. of dots: 589,824 dots (1,024 [H] × 576 [V])

Lens

1–1.2 × zoom lens, F1.75–2.04 f=28.0–33.5 mm

Projection lamp

210 W/168 W SHP lamp

Video input signal

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75

 

terminated

S-video input signal

4-pin Mini DIN connector (INPUT 3)

 

Y (luminance signal): 1.0 Vp-p, sync negative, 75 terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 terminated

Component input signal RCA Connector

(INPUT 1) Y: 1.0 Vp-p, sync negative, 75 terminated

PB: 0.7 Vp-p, 75 terminated

PR: 0.7 Vp-p, 75 terminated

Component input signal 29-pin connector

(INPUT 2) DVI input signal: Digital 250–1,000 mV 50 Analog 0.7 Vp-p 75

Y:1.0 Vp-p, sync negative, 75 terminated PB: 0.7 Vp-p, 75 terminated

PR: 0.7 Vp-p, 75 terminated

Horizontal resolution

520 TV lines (NTSC 3.58 input)

RGB input signal

DVI-I terminal

 

 

<Digital>

 

50

 

Input impedance

 

Input level

250-1000 mV

 

<Analog>

 

75

 

Input impedance

 

Input level

0.7 Vp-p

 

<Synchronization signal>

Separate sync/Composite sync

 

Input level TTL level

 

Input impedance

1 K

 

Green on sync

 

 

Input level (Synchronizing input) 0.286 Vp-p

 

Input impedance

75

Pixel clock

12–80 MHz

 

Vertical frequency

43–75 Hz

 

Horizontal frequency

15–70 kHz

 

Computer control signal

9-pin D-sub connector (RS-232C Port)

Rated voltage

AC 100–240 V

 

Input current

3.2 A

 

Rated frequency

50/60 Hz

 

Power consumption

285 W

 

Heat dissipation

1,070 BTU/hour

 

Operating temperature

+5°C to +35°C

 

Storage temperature

20°C to +60°C

 

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

368 (W) × 153.8 (H) × 327 (D) mm (including swivel stand)

 

368 (W) × 118 (H) × 327 (D) mm (main body only)

Weight (approx.)

4.6 kg (including swivel stand)

 

4.1 kg (main body only)

Supplied accessories

Remote control, Two AA size batteries, Power cord, 21 pin RCA conversion adaptor,

 

Video cable, Terminal cover, Screws for terminal cover, Lens cap (attached on the

 

body), Operation manual

Replacement parts

Lamp unit (Lamp/cage module) (BQC-XVZ200++1), Remote control

 

(RRMCGA218WJSA), AA size batteries, Power cord for Europe except U.K.

 

(QACCV4002CEZZ), Power cord for U.K., Hong Kong and Singapore

(QACCBA012WJPZ), Power cord for Australia and New Zealand (QACCLA018WJPZ),

21 pin RCA conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Terminal cover (GCOVAA116WJKB), Screws for terminal cover (XBBSN40P10000), Lens cap (CCAPHA004WJ01), Operation manuals; for European 7 languages (TINS- B007WJZZ) / for Chinese, Korean and Arabic (TINS-B008WJZZ)

This SHARP projector uses a DMD chip. This very sophisticated chip contains 589,824 pixels. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.

Specifications are subject to change without notice.

Appendix

-67

Image 69
Contents XV-Z200E Special Note for Users in the U.K Introduction Lamp Replacement Contents Important Safeguards Introduction Important Safeguards Required equipments Quick GuidePart Names Projector Front and Top ViewProjector Side and Rear View Projector Rear View Using the Terminal CoverRemote Control Front View Remote Control Top ViewPart Names Available Range of the Remote Control Operating the Remote ControlInserting the Batteries Insert the included batteriesPower cord AccessoriesConnections and Setup Before Connecting Connecting the Projector to Other DevicesConnecting the Power Cord This projector can be connected toConnecting to Video Equipment Using an S-video Cable Input Connecting to Video EquipmentConnect the composite video cable to the video equipment Connect a composite video cable to the projectorConnect a component cable to the projector Connecting to a DVD Player and DTV DecoderConnect the above cable to the video equipment Connect a DVI to 15-pin D-sub adaptor to the projectorOptional Accessory Connecting to a Computer Digital Input Connecting to a com- puter with Digital RGB output TerminalControlling the Projector by a Computer Controlling Projector Using an RS-232C CableUsing the Swivel Stand SetupRemoving the Swivel Stand Lock the lever on the Swivel StandUsing the Lens Shift Focusing and ZoomingAttaching the Swivel Stand Projected ImageWhen using a normal screen Adjusting the Projection DistanceUpper and Lower Lens Shift Position Rear Projection Image ProjectionBasic Operation Plug the power cord into the wall outlet Basic ProcedurePress on the remote control or on the projector Image ProjectionAbout the Input modes Selecting the On- screen Display Lan- guageTurning the Power off To return to the normal screen Press again Keystone CorrectionScreen area Adjusting the Picture Aspect Ratio Freezing a Moving ImagePress Side BAR Smart Stretch Cinema Zoom Adjustments and Settings Menu Selections Adjustments Using the Menu ScreenPress or to select the item you want to adjust Press \ or to adjust the item selectedPress \ or to display the other menu screens Menu Selections Settings Press \ or to displayOther menu screens Press or to select the item you want to set Menu Bar Items Input 1 / 2 / Digital Input ModeInput 3 / 4 Mode Adjusting Image Prefer- ences Adjusting the PicturePress or to fine adjust the colour temperature Adjusting the Colour TemperatureEmphasizing Contrast Gamma Correction FunctionStoring the Adjustment Values for Each Memory Number Picture Setting FunctionWhen Auto Sync is OFF Adjusting the Computer and DVD/DTV ImagesSpecial Modes Adjust- ment Checking the Input Signal Auto Sync AdjustmentUsing the Options Menu Checking the Lamp Life StatusTurning on/off the On- screen Display Selecting the Signal Type Setting the Video Signal Video menu onlyUsing the Options Menu Selecting a Background Image Setting the Eco ModeSelecting the Menu Screen Position Automatic Power Shut- off FunctionSelecting the Menu Colour Reversing/Inverting Projected Images Setting the Projection ModeAppendix About the temperature warning indicator Maintenance IndicatorsRegarding the Lamp LampReplacing the Lamp Put the projector into the standby mode Removing and Install- ing the Lamp UnitUnplug the power cord Remove the Swivel Stand. See Remove the lamp unit coverPlug the power cord Resetting the Lamp TimerReset the lamp timer Insert the new lamp unitCleaning Ventilative Holes Cleaning the Ventilative HolesTroubleshooting Using the Kensington LockDVI-I Input 2 / Digital Input port 29 pin connector Connecting Pin AssignmentsCommands RS-232C Specifications and Command SettingsPC control Communication conditionsComputer Compatibility Chart PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsDimensions Aspect Ratio GlossaryDVI IndexSharp Corporation

XV-Z200E specifications

The Sharp XV-Z200E is an innovative and highly regarded multimedia projector designed for both home entertainment enthusiasts and professional presentations. Renowned for its advanced features and cutting-edge technology, the XV-Z200E stands out for its exceptional image quality and versatility.

One of the primary attributes of the XV-Z200E is its impressive native resolution of 1280 x 720 pixels, which supports high-definition content. This resolution allows users to enjoy vivid and sharp images, making it ideal for watching movies, gaming, or delivering impactful presentations. Furthermore, the projector boasts a bright luminosity of up to 2000 ANSI lumens, ensuring clear visibility even in ambient light conditions.

The XV-Z200E employs DLP (Digital Light Processing) technology, which is known for its reliability and ability to produce high-quality images with rich colors and deep contrasts. The color wheel within the projector enhances its capability to reproduce a wider spectrum of colors, resulting in a more immersive viewing experience. Additionally, the high contrast ratio of 2500:1 means that users can expect deeper blacks and brighter whites, generating a more dynamic image overall.

Portability is another significant feature of the Sharp XV-Z200E. Weighing approximately 2.7 kilograms, it is lightweight and compact, making it easy to transport for business trips or gatherings. The projector also includes a variety of connectivity options, including HDMI and VGA inputs, which makes it compatible with a broad range of devices such as laptops, DVD players, and gaming consoles.

For user convenience, the XV-Z200E is equipped with an intuitive interface, facilitating easy setup and operation. The built-in speaker provides adequate sound quality for small to medium-sized rooms, although users have the option to connect external audio systems for enhanced sound experiences.

In conclusion, the Sharp XV-Z200E combines advanced DLP technology with high brightness and resolution to offer an exceptional viewing experience. Its portability and multiple connectivity options make it suitable for various environments, from personal use at home to professional presentations in business settings. With its blend of performance and user-friendly features, the XX-Z200E remains a compelling choice for anyone in search of a reliable and high-quality projector.