Sharp XV-Z200E operation manual Using the Kensington Lock, Troubleshooting

Page 65

Using the Kensington Lock

This projector has a Kensington Secu-

rity Standard connector for use with aRear View Kensington MicroSaver Security Sys-

tem. Refer to the information that came with the system for instructions on how to use it to secure the projector.

Kensington Security Standard connector

Troubleshooting

Problem

Check

 

 

No picture appears.

•Projector power cord is not plugged into the wall outlet.

 

•Selected input is wrong. (See page 31.)

 

•Cables incorrectly connected to back panel of the projector. (See pages

 

14–23.)

 

•“Contrast” and “Bright” adjustments are set to minimum position. (See

 

page 44.)

 

 

Colour is faded or poor.

•Picture adjustments are not correct. (See page 44.)

 

 

Picture is blurred.

•Adjust the focus. (See page 25.)

 

•Projection distance is too long or too short to allow for proper focus. (See

 

pages 26 and 27.)

 

 

No OSD appears.

•OSD Display is set to “OFF”, preventing to display some or all On-screen

 

Displays. (See page 51.)

 

 

An unusual sound is

•If the picture is normal, the sound is due to cabinet shrinkage caused by

occasionally heard from the

temperature changes. This will not affect operation or performance of the

cabinet.

projector.

 

 

Maintenance indicator

•Refer to “Maintenance Indicators” on page 58.

illuminates.

 

 

 

Picture noise appears.

•Adjust the “Phase” setting. (See page 48.)

 

 

Image is green on INPUT 2

•Change the input signal type. (See page 52.)

Component.

 

Image is pink (no green) on

 

INPUT 2 RGB.

 

 

 

Appendix

-63

Page 64 Page 66
Image 65
Page 64 Page 66
Contents XV-Z200E Special Note for Users in the U.K Introduction Lamp Replacement Contents Important Safeguards Introduction Important Safeguards Required equipments Quick GuideProjector Side and Rear View Part NamesProjector Front and Top View Projector Rear View Using the Terminal CoverPart Names Remote Control Front ViewRemote Control Top View Available Range of the Remote Control Operating the Remote ControlInserting the Batteries Insert the included batteriesPower cord AccessoriesConnections and Setup Before Connecting Connecting the Projector to Other DevicesConnecting the Power Cord This projector can be connected toConnecting to Video Equipment Using an S-video Cable Input Connecting to Video EquipmentConnect the composite video cable to the video equipment Connect a composite video cable to the projectorConnect a component cable to the projector Connecting to a DVD Player and DTV DecoderConnect the above cable to the video equipment Connect a DVI to 15-pin D-sub adaptor to the projectorOptional Accessory Connecting to a Computer Digital Input Connecting to a com- puter with Digital RGB output TerminalControlling the Projector by a Computer Controlling Projector Using an RS-232C CableUsing the Swivel Stand SetupRemoving the Swivel Stand Lock the lever on the Swivel StandUsing the Lens Shift Focusing and ZoomingAttaching the Swivel Stand Projected ImageWhen using a normal screen Adjusting the Projection DistanceUpper and Lower Lens Shift Position Rear Projection Image ProjectionBasic Operation Plug the power cord into the wall outlet Basic ProcedurePress on the remote control or on the projector Image ProjectionAbout the Input modes Selecting the On- screen Display Lan- guageTurning the Power off To return to the normal screen Press again Keystone CorrectionScreen area Press Adjusting the Picture Aspect RatioFreezing a Moving Image Side BAR Smart Stretch Cinema Zoom Adjustments and Settings Menu Selections Adjustments Using the Menu ScreenPress \ or to display the other menu screens Press or to select the item you want to adjustPress \ or to adjust the item selected Other menu screens Menu Selections SettingsPress \ or to display Press or to select the item you want to set Menu Bar Items Input 1 / 2 / Digital Input ModeInput 3 / 4 Mode Adjusting Image Prefer- ences Adjusting the PicturePress or to fine adjust the colour temperature Adjusting the Colour TemperatureEmphasizing Contrast Gamma Correction FunctionStoring the Adjustment Values for Each Memory Number Picture Setting FunctionWhen Auto Sync is OFF Adjusting the Computer and DVD/DTV ImagesSpecial Modes Adjust- ment Checking the Input Signal Auto Sync AdjustmentTurning on/off the On- screen Display Using the Options MenuChecking the Lamp Life Status Using the Options Menu Selecting the Signal TypeSetting the Video Signal Video menu only Selecting a Background Image Setting the Eco ModeSelecting the Menu Screen Position Automatic Power Shut- off FunctionSelecting the Menu Colour Reversing/Inverting Projected Images Setting the Projection ModeAppendix About the temperature warning indicator Maintenance IndicatorsReplacing the Lamp Regarding the LampLamp Put the projector into the standby mode Removing and Install- ing the Lamp UnitUnplug the power cord Remove the Swivel Stand. See Remove the lamp unit coverPlug the power cord Resetting the Lamp TimerReset the lamp timer Insert the new lamp unitCleaning Ventilative Holes Cleaning the Ventilative HolesTroubleshooting Using the Kensington LockDVI-I Input 2 / Digital Input port 29 pin connector Connecting Pin AssignmentsCommands RS-232C Specifications and Command SettingsPC control Communication conditionsComputer Compatibility Chart PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsDimensions Aspect Ratio GlossaryDVI IndexSharp Corporation

XV-Z200E specifications

The Sharp XV-Z200E is an innovative and highly regarded multimedia projector designed for both home entertainment enthusiasts and professional presentations. Renowned for its advanced features and cutting-edge technology, the XV-Z200E stands out for its exceptional image quality and versatility.

One of the primary attributes of the XV-Z200E is its impressive native resolution of 1280 x 720 pixels, which supports high-definition content. This resolution allows users to enjoy vivid and sharp images, making it ideal for watching movies, gaming, or delivering impactful presentations. Furthermore, the projector boasts a bright luminosity of up to 2000 ANSI lumens, ensuring clear visibility even in ambient light conditions.

The XV-Z200E employs DLP (Digital Light Processing) technology, which is known for its reliability and ability to produce high-quality images with rich colors and deep contrasts. The color wheel within the projector enhances its capability to reproduce a wider spectrum of colors, resulting in a more immersive viewing experience. Additionally, the high contrast ratio of 2500:1 means that users can expect deeper blacks and brighter whites, generating a more dynamic image overall.

Portability is another significant feature of the Sharp XV-Z200E. Weighing approximately 2.7 kilograms, it is lightweight and compact, making it easy to transport for business trips or gatherings. The projector also includes a variety of connectivity options, including HDMI and VGA inputs, which makes it compatible with a broad range of devices such as laptops, DVD players, and gaming consoles.

For user convenience, the XV-Z200E is equipped with an intuitive interface, facilitating easy setup and operation. The built-in speaker provides adequate sound quality for small to medium-sized rooms, although users have the option to connect external audio systems for enhanced sound experiences.

In conclusion, the Sharp XV-Z200E combines advanced DLP technology with high brightness and resolution to offer an exceptional viewing experience. Its portability and multiple connectivity options make it suitable for various environments, from personal use at home to professional presentations in business settings. With its blend of performance and user-friendly features, the XX-Z200E remains a compelling choice for anyone in search of a reliable and high-quality projector.
Top Page Image Contents