Sharp AJ-2200 Indicator Lights, No ink, or a print head is not installed, Front cover is open

Page 15

INDICATOR LIGHTS

When only the green power lamp is lit, the printer is working properly.

When a printer error occurs, a light will indicate what problem has occurred, as explained below.

When turning on the unit for the first time after purchasing, the ink lamp blinks rapidly because print heads and ink tanks are not attached yet. The lamp will go out when the initial setup completes.

	......	lit	......blinking	fast blinking	extinguished (lamp is off)
		Light condition		Problem and Solution
	Ink	Power	Paper	Problem and Solution
	Ink	Power	Paper

Paper tray is empty, or a paper jam has occurred.

Load more paper or remove the jammed paper and press the paper button.

No ink, or a print head is not installed.

Change the ink tank, or install a print head.

Front cover is open.

Close the front cover.

The printer is warming up, or receiving data.

Please wait.

The carriage is not operating normally, or some errors may have occurred inside the printer.

If any paper is jammed, remove the jammed paper, and then press the "Paper" button. If no paper is jammed, press the "Paper" button to cancel the error warning. If the lights are still blinking even after trying to cancel the error, disconnect the power plug from the printer, and then insert it again.

If your printer still does not work, please contact your authorised SHARP service centre.

For more details on solving a problem, refer to the "Troubleshooting" section of the Online Manual.

SETTING UP THE PRINTER

13

Image 15

Contents AJ-2200 For Customers in U.K Page Contents Main Features Online Manual Conventions used in this manual and Online ManualTrademark acknowledgements Windows Macintosh Setup ProcedureSetup workflow ReferenceConfirming the Contents Part Names and Functions Bypass tray USB interface connector B typeParallel interface connector 36pin Power socketUnpacking Attaching the Trays Attach the paper tray by firmly pushing down both edgesAttach the output tray as shown in the illustration Setting UP HOW to Shut OFF Power Connecting the Power CordPrinter is warming up, or receiving data Indicator LightsNo ink, or a print head is not installed Front cover is openRaise the print head latch Installing the Print Heads and INK TanksInstalling the Print Heads Open the front coverRemove the print heads from their protective cases Insert the print headsLower the print head latch Turn the ink tanks upside down Inserting the ink tanksPower lamp will blink and warming-up will start Close the front coverConfirm the ink lamp is not blinking Loading Paper Into the Paper Tray Loading PaperLoading Paper Attach the output tray When loading index cards, postcards or birthday cardsLoading Paper When loading an envelope When loading banner paperLoading the Bypass Tray with Paper Before Installation Reference pages for how to installHardware and Software Requirements Page ROM icon Click the Cancel buttonDouble-click the Setup icon Double-click My Computer , and then double-click the CDSetup program will start to copy the files Setting UP for Click the Finish button Double-click My Computer , and then double-click the CD Setup program will start to copy the files Turn on the printer, and then turn on your computer Installing onto WindowsCancel button, you may not install the driver successfully Make sure that the printer is connected to your computerSetup program will start to copy the files You have completed the installation of the printer driver Insert the supplied CD-ROM into your CD-ROM drive Installing the Printer Driver Setup program will start to copy the files Aligning the Print Head Select a pattern sample for Pattern a ExampleSelect a pattern sample for Pattern B Click the OK button in the Align print head dialog box Select a pattern sample for Pattern CSelect a pattern sample for Pattern D Click To read the Online Manual HOW to USE the Online ManualTurn on your computer Double-click the Manual folder, double-click the EnglishHOW to Print Installing Acrobat ReaderBonus Software Make sure that the printer is connected to your computer by Installing the Printer DriverSetting UP for Macintosh Selecting the printer Select Print from the File menu of your application Double-click the CD-ROM icon on the desktop Double-click the Acrobat folder and double-click the Reader Installer iconName AJ-2200 Specifications of the PrinterSupplies Paper TypeInterface Cable Index InstallingSoftware License Limited Warranty on Media Sharp Corporation