Sharp appendix Specifications of the Printer, Name AJ-2200

Page 50

APPENDIX

This chapter shows specifications of the printer, supplies, and how to store the supplies.

SPECIFICATIONS OF THE PRINTER

Name

AJ-2200

Type

 

On demand, thermal inkjet type

Resolution

 

Max. 2400dpi x 1200dpi

Printing speed*1

Monochrome

17.0ppm

Colour

10.0ppm

 

Paper

Width

Max. 215.9mm (8.5") Min. 76.2mm (3")

Length *2

Max. 355.6mm (14") Min. 127mm (5")

 

Void area

Min.

Top 3mm, Bottom 3mm, Left 3mm, Right 3mm

Recommendation

Top 19mm, Bottom 19mm, Left 10mm, Right 10mm

 

Print description

language

Host based printing system

Interface

 

IEEE1284-compliant bi-directional parallel interface

 

USB interface (B type)

 

 

Paper tray

Paper tray*3

Max. 150 sheets of plain paper*5

Output tray*4

Max. 50 sheets of plain paper*5

capacity

 

Bypass tray

1 sheet

Ink life*6

Black

400 sheets (700 sheets with the optional AJ-T20B)

Colour

350 sheets

 

External dimensions

(W x D x H)

476mm x 374mm x 191mm (18.7" x 14.7" x 7.5")

Weight

 

6.15kg (13.5lbs.)

Power supply*7

 

Local voltage (±10%)

Power

Idle

9.5W

consumption

Printing

Max. 30.0W

Operation

Temperature

10°C - 35°C (50°F - 95°F)

condition

Relative humidity

20% - 85%

Storage condition

Temperature

-25°C - 40°C (-13°F - 104°F)

Relative humidity

20% - 85%

 

 

Sound Power Level LWA (1B=10dB)

 

 

Printing: 5.5[B], Print mode: Normal,

 

 

Standby: Background noise level

Noise level

 

Sound Pressure Level LPA (bystander positions)

 

 

Printing: 45[dB(A)], Print mode: Normal,

 

 

Standby: Background noise level

 

 

Noise emission measurement in accordance with ISO 7779.

Emission Concentration

Dust: less than 0.075mg/m3

(measurement according to RAL-UZ62)

 

*1When printing SHARP original data with draft mode.

*2For the Bypass Tray, the maximum paper size is 5-sheeted A4/8.5"x11" banner.

*3Holds up to total thickness of 15mm paper stack.

*4Holds up to total thickness of 5mm paper stack.

*5With 75g/m2 (20lbs.) plain paper.

*6When using 20.3cm x 25.4cm (8"x 10") size paper at 5% image area in normal usage.

*7For this printer's power supply requirement, see the name plate located on the back of the printer.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

48

Page 49 Page 51
Image 50
Page 49 Page 51
Contents AJ-2200 For Customers in U.K Page Contents Main Features Trademark acknowledgements Online ManualConventions used in this manual and Online Manual Reference Setup ProcedureSetup workflow Windows MacintoshConfirming the Contents Part Names and Functions Power socket USB interface connector B typeParallel interface connector 36pin Bypass trayUnpacking Attach the output tray as shown in the illustration Attaching the TraysAttach the paper tray by firmly pushing down both edges Setting UP Connecting the Power Cord HOW to Shut OFF PowerFront cover is open Indicator LightsNo ink, or a print head is not installed Printer is warming up, or receiving dataOpen the front cover Installing the Print Heads and INK TanksInstalling the Print Heads Raise the print head latchLower the print head latch Remove the print heads from their protective casesInsert the print heads Inserting the ink tanks Turn the ink tanks upside downConfirm the ink lamp is not blinking Power lamp will blink and warming-up will startClose the front cover Loading Paper Loading Paper Into the Paper TrayLoading Paper When loading index cards, postcards or birthday cards Attach the output trayLoading Paper Loading the Bypass Tray with Paper When loading an envelopeWhen loading banner paper Hardware and Software Requirements Before InstallationReference pages for how to install Page Double-click My Computer , and then double-click the CD Click the Cancel buttonDouble-click the Setup icon ROM iconSetup program will start to copy the files Setting UP for Click the Finish button Double-click My Computer , and then double-click the CD Setup program will start to copy the files Make sure that the printer is connected to your computer Installing onto WindowsCancel button, you may not install the driver successfully Turn on the printer, and then turn on your computerSetup program will start to copy the files You have completed the installation of the printer driver Insert the supplied CD-ROM into your CD-ROM drive Installing the Printer Driver Setup program will start to copy the files Aligning the Print Head Select a pattern sample for Pattern B Select a pattern sample for Pattern aExample Select a pattern sample for Pattern D Click the OK button in the Align print head dialog boxSelect a pattern sample for Pattern C Double-click the Manual folder, double-click the English HOW to USE the Online ManualTurn on your computer Click To read the Online ManualBonus Software HOW to PrintInstalling Acrobat Reader Installing the Printer Driver Make sure that the printer is connected to your computer bySetting UP for Macintosh Selecting the printer Select Print from the File menu of your application Double-click the CD-ROM icon on the desktop Installer icon Double-click the Acrobat folder and double-click the ReaderSpecifications of the Printer Name AJ-2200Interface Cable SuppliesPaper Type Installing IndexSoftware License Limited Warranty on Media Sharp Corporation
Top Page Image Contents