Sharp QS-2770H, QS-2760H ADD Mode Selector, + position Effective only in addition and subtraction

•A maximum of 4 digits can be stored (decimal point is

not counted as a digit).

Note: • Be sure to set this selector to the “•” position after storing an each rate.

•Only one rate can be stored. If you enter a new rate, the previous rate will be cleared.

ADD MODE SELECTOR:

“A/+” position – Effective only in addition and subtraction:

Use of the A/+ mode permits addition and subtraction of numbers without an entry of the decimal point. When the A/+ mode is activated, the decimal point is automatically positioned according to the decimal selector setting.

EXAMPLES: Set A/+- • -A/x to A/+

A. Set decimal to 2			1,234.56 +
Enter	123456	Tape prints
B. Set decimal to 3			123.456 +
Enter	123456	Tape prints

Use of the , , and keys will automatically override the Add mode and decimally correct answers will be printed at the preset decimal position.

EXAMPLES: Set A/+- • -A/x to A/+, 5/4

A. Set decimal to 2			0.1234 ⋅
Enter	.1234	Tape prints
	100		100. =
			12.34
B. Set decimal to 3			2. ÷
Enter	2	Tape prints
	3		3. =
			0.667
C. Set decimal to 2			1.23 +
Enter	123	Tape prints
	10		10.00 +
	➝		11.23

Note that decimal point was entered.

“A/x” position – Multiplication and division:

When the A/x mode is activated, the number entered

before or key will override the add mode. But the

– 4 –