number entered following 
or 
key and before 
(or 
, 
, 
, 
, 
) key will obey the decimal setting. This is useful for invoicing.
EXAMPLE: Set A/+- •
Set decimal to 2 |
| 7. ⋅ | |
Enter | 7 | Tape prints | |
| 3 |
| 0.03 = |
|
|
| 0.21 |
Note: Use of the 
key will automatically override the A/x mode.
Addition and subtraction:
The A/x mode functions same as the A/+ mode. “•” position: Neutral
ITEM COUNT MODE SELECTOR:
“IC±” position: 1) The counter will count the number of times that the 
key has been pressed in addition.
Note: • Each time the 
key is used in subtraction, 1 will be subtracted from the count.
•The count is printed when the calculated result is obtained.
•Pressing of the 
, 
, 
, 
or 
key clears the counter.
2)When the grand total mode selector is in the ON position (GT), the counter will count the number of times that the calculation results have been stored in
the grand total memory. To print and clear the count, press the 
key.
3)The memory item counter will count the number of
times that the 
key has been pressed in the addition.
Note: • Each time the 
key is used in the subtraction, 1 will be subtracted from the
count.
•The count is printed when the memory is recalled.
•Pressing of the 
key clears the counter.
“IC+” position: 1) The counter will count the number of times that the 
or 
has been pressed in addition and subtraction. Note: • The count is printed when the calculated
result is obtained.
– 5 –