AdonisC2_ENcopy122F_FM.book Page 68 Thursday, February 15, 2001 3:23 PM
Copying
Other Functions
Energy Saver Mode |
| Interrupt Copy |
If you do not operate the machine for a certain period after copying, or
2 when you press the {Energy Saver} key, the display disappears and the machine enters Energy Saver mode. When you press the {Energy Saver} key again, the machine returns to the ready condition. In Energy Saver mode, the machine uses less electrici- ty.
Note
❒If you press the {Energy Saver} key during the operation, the current settings will be cleared.
❒It takes about 3 seconds to return to the ready condition from Energy Saver mode.
Reference
⇒“Low Power Timer” in the Sys- tem Settings manual.
68
Use this function if you wish to inter- rupt a long copy job to make urgently needed copies.
Limitation
❒You cannot use the Interrupt Copy function when scanning fax originals.
Note
❒The procedure for making inter- rupt copies depends on which kind of operation the machine is currently carrying out.
To interrupt an original being fed
A Press the {Interrupt} key.
The Interrupt indicator goes on and scanning stops.
B Remove the originals that were being copied and set the originals you wish to copy.
C Press the {Start} key.
The machine starts making your copies.
D When your copy job is finished, remove your originals and copies.
E Press the {Interrupt} key again. The Interrupt indicator goes off.
F When the display prompts you to, replace the originals that were be- ing copied before.
G Press the {Start} key.
The previous copy job settings will be restored and the machine will con- tinue copying from where it left off.
