Savin 2235, 3502/3502p, 4502/4502p, 2545/2545p, 2245 Auto Reduce/Enlarge, B Select the paper tray

AdonisC2_ENcopy122F_FM.book Page 43 Thursday, February 15, 2001 3:23 PM

Basic Functions

Auto Reduce/Enlarge

The machine can choose an appropri- ate reproduction ratio based on the paper and original sizes you select.

Limitation

❒You cannot use the bypass tray with this function.

Note

❒When you use Auto Reduce/En- large, see the following table for possible original sizes and direc- tions:

❖Metric version

Where Original Is	Original Size and
Set	Direction
Exposure glass	A3L, B4L,
	A4KL, B5KL
Document feeder *1	A3L, B4L,
	A4KL, B5KL,
	A5KL, B6KL,
	11" ⋅ 17"L,
	81/2" ⋅ 11"KL

*1 You cannot scan 2-sided B6 origi- nals.

❖ Inch version

Where Original Is	Original Size and
Set	Direction
Exposure glass	11" ⋅ 17"L,
	81/2" ⋅ 14"L,
	81/2" ⋅ 11"KL
Document feeder *1	A4KL,11" ⋅ 17"L,
	81/2" ⋅ 14"L,
	81/2" ⋅ 11"KL,
	51/2" ⋅ 81/2"KL

*1 You cannot scan two sided B6 orig- inals.

❒The reproduction ratios the ma- chine will select are 25 – 400%.

❒For some originals, the original

size might not be detected correct- ly. ⇒ P.20 “Sizes difficult to detect”.

❒You can set originals of different

sizes in the document feeder at a time. ⇒ P.34 “Mixed Size mode”.

❒You cannot use the Rotate function when enlarging B4 or A3 originals. When enlarging on to B4 or A3 size

copy paper, set the original in the L direction.

A Press the [Auto Reduce/Enlarge] key.

B Select the paper tray.

Note

❒If you do not wish to set any other functions, press the {Start} key to start copying.

2

43