Options | Savin 2545/2545p, 3502/3502p, 4502/4502p, 2235, 2245

AdonisC2_ENcopy122F_FM.book Page 8 Thursday, February 15, 2001 3:23 PM

Options

1.1000-Sheet Finisher

Sorts, stacks, and staples copies.

2.External tray

If you selected this as the output tray, copied paper is delivered here face down.

3.Platen cover

Lower this cover over originals for copy- ing.

4.Document feeder (ADF) ⇒ P.32

Insert a stack of originals here. They will be fed automatically.

5.Internal tray 2 (1 bin tray)

If you selected this as the output tray, copied paper is delivered here face down.

6.Large Capacity Tray (LCT)

Holds 1,500 sheets of paper.

7.Paper tray unit

Consists of two paper trays.

8.Bridge unit

Relays copies to the external tray or fin- isher.

9.2 Tray Finisher

Sorts, stacks, and staples copies. You can also punch copies. (The Punch function is optional.)

•1: Finisher shift tray 1

•2: Finisher shift tray 2

8

Image 21

Savin 2545/2545p, 3502/3502p, 4502/4502p, 2235, 2245, 2535/2535p manual Options

Contents

Zdsh000j.eps ⇒ P.237 Power Connection FCC Requirements Means Power ON. c means Stand by Safety During Operation Safety InformationPage Symbols How to Read this ManualPreparation Limitation Table of Contents Preset Reduce/Enlarge Job Preset Other FunctionsBasic Functions Sort/Stack/Staple 112 101116 121 151 149156 161 202 198206 207 236 235238 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.37 ⇒ P.39103 ⇒ P.77 Guide To Components Ventilation hole Bypass tray Right side cover Output Tray Guide To copy onto normal paper and thick paperTo copy onto OHP transparencies and translucent paper Options Control Panel Clear/Stop key Function Status indicatorNumber keys Function keys Display Panel Displays and Key OperationsInitial copy display Document Server initial display Function menu Function List Based on Options Set the paper of the same size KL in the paper trays Turning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the ma- chine Turning On the Power Turning Off the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Metric version OriginalsInch version Non-recommended originals for the document feeder Sizes difficult to detect Sizes Detectable by the Auto Paper Select Missing Image Area Exposure glassDocument feeder Recommended Paper Sizes and Types Copy Paper Ify the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Paper Storage Non-recommended Paper Toner Toner StorageUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedureMake sure that there are no previ- ous settings remaining Set your originals System Reset Setting Originals on the Exposure Glass Setting OriginalsLift the platen cover or the docu- ment feeder Lower the platen cover or docu- ment feeder Original Orientation Setting Originals Document FeederStandard Orientation Turn Batch mode Setting Special OriginalsPress the key Press the OK key Press the Batch key Mixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Make sure that the Auto Image Den- sity key is selected Press the Lighter or Darker key to adjust the density Selecting Original Type Setting Selecting Copy Paper Auto Paper SelectManual Paper Select Make sure that the Auto Paper Select key is selected Auto Paper Select Rotated copy Auto Reduce/Enlarge Press the Auto Reduce/Enlarge keySelect the paper tray Stack Sort/Stack/Staple Sort Press the Sort or Rotate Sort key Shift Sort Enter the number of copy sets with the number keys When the 2 Tray Finisher is installedSet the original, then press the Start key After all originals are scanned, press the # key Stack Shift StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Tray Finisher Sheet Finisher Sort/Stack/Staple Select one of the stapling positions ⇒ P.51 Stapling position and original setting To Remove the Paper from the Staple Unit When Memory Reaches 0%Press the No key to resume scanning Press the Yes key Holes Punch Punch hole positions Select the Punch position Punchable paper sizes are as follows Enter the number of copy sets with the number keys Open the bypass tray Adjust the guides to copy paper size Copying from the Bypass TrayExtender Press the # key When copying onto custom size paper Copying When Copying onto OHP Transparencies or Thick Paper Select OHP Sheet or Thick PaperPress the OK key Set your originals and press the Start key Programs Storing Your SettingsStoring a Program Deleting a Program Deleting a Program Make sure the program settingsRepeat steps E and F in Storing a Program Press the Do not Register key Recalling a Program Press the Copy key Set up the next copy job Job PresetCancel key Press the To Printing key Other Functions Energy Saver Mode Interrupt CopyTo interrupt an original being fed Press the Interrupt key Sample Copy Original BeeperTo interrupt copying after all originals have been fed Set your original Press the Start key Press the Clear/Stop key when Copying is displayed Press the Continue keyPress the Change Quantity key Ratio % Paper size Preset Reduce/Enlarge Create Margin mode Press the Reduce/Enlarge keyPress the Enlarge or Reduce key Zoom Adjust the ratios with the n or o keyEnter the ratio Press the Mag. Ratio key Enter the desired ratio with the number keys Press the Reduce/Enlarge key Press the Specifid Ratio key Size Magnification Press the OK key Set your original, then press the Start key