Savin 4502/4502p, 3502/3502p, 2235, 2545/2545p, 2245 Postcards should be fed from the bypass tray

AdonisC2_ENcopy122F_FM.book Page 24 Thursday, February 15, 2001 3:23 PM

Basics

Important

❒If you use damp or curled paper, a misfeed might occur. In this case, try turn- ing over the paper stack in the paper tray. If there is no improvement, change to paper with less curl.

1

Note

❒When you use the bypass tray, it is recommended to set the copy paper direc- tion to L.

❒Postcards should be fed from the bypass tray.

❒If you load paper of the same size and in the same direction in two or more trays, the machine automatically shifts to another tray when the tray in use runs out of paper. This function is called Auto Tray Switching. (However, this only true if the Paper Type is recycled or special paper, and the setting for the

other trays are the same.) This saves interrupting a copy run to replenish pa- per when making a large number of copies. ⇒ P.40 “Selecting Copy Paper”, ⇒ P.212 “Auto Tray Switching”

❒If you select Thick Paper mode, copying speed might be reduced.

24