Manuals / Savin / Computer Equipment / All in One Printer

Savin 2245, 3502/3502p, 4502/4502p, 2235, 2545/2545p, 2535/2535p manual Toner Storage, Used Toner

Models: 4502/4502p 2245 2545/2545p 3502/3502p 2235 2535/2535p

1 89

Download 89 pages 21.68 Kb

Page 40

AdonisC2_ENcopy122F_FM.book Page 27 Thursday, February 15, 2001 3:23 PM

Toner

Toner

Handling Toner
Handling Toner		1

RWARNING:

•Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations for plastics.

RCAUTION:

•Keep toner (used or unused) and toner containers out of reach of children.

RCAUTION:

•Our products are engineered to meet high standards of quality and function- ality, and we recommend that you only use the expendable supplies avail- able at an authorized dealer.

Important

❒If you use toner other than the recommended type, a fault might occur.

Reference

If you want to add toner. ⇒ P.183 “D Adding Toner”

Toner Storage

When storing toner, the following precautions should always be followed:

•Store toner containers in a cool, dry place free from direct sunlight.

•Store on a flat surface.

Used Toner

Note

❒Used toner cannot be re-used.

27

Image 40

Savin 2245, 3502/3502p, 4502/4502p, 2235, 2545/2545p, 2535/2535p manual Toner Storage, Used Toner

Contents

Zdsh000j.eps ⇒ P.237 Power Connection Means Power ON. c means Stand by FCC Requirements Safety Information Safety During OperationPage How to Read this Manual SymbolsPreparation Limitation Table of Contents Job Preset Other Functions Preset Reduce/EnlargeBasic Functions Sort/Stack/Staple 101 112116 121 149 151156 161 198 202206 207 235 236238 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.39 ⇒ P.37103 ⇒ P.77 Guide To Components Bypass tray Right side cover Ventilation hole To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Options Control Panel Function Status indicator Clear/Stop keyNumber keys Function keys Displays and Key Operations Display PanelInitial copy display Function menu Document Server initial display Function List Based on Options Set the paper of the same size KL in the paper trays Turning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the ma- chine Turning Off the Power Turning On the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Originals Metric versionInch version Non-recommended originals for the document feeder Sizes Detectable by the Auto Paper Select Sizes difficult to detect Exposure glass Missing Image AreaDocument feeder Copy Paper Recommended Paper Sizes and Types Ify the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Non-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Basic Procedure Make sure that the machine is in Copy modeMake sure that there are no previ- ous settings remaining Set your originals System Reset Setting Originals Setting Originals on the Exposure GlassLift the platen cover or the docu- ment feeder Lower the platen cover or docu- ment feeder Setting Originals Document Feeder Original OrientationStandard Orientation Turn Setting Special Originals Batch modePress the key Press the OK key Press the Batch key Mixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Press the Lighter or Darker key to adjust the density Make sure that the Auto Image Den- sity key is selected Selecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Auto Paper Select Make sure that the Auto Paper Select key is selected Rotated copy Press the Auto Reduce/Enlarge key Auto Reduce/EnlargeSelect the paper tray Sort/Stack/Staple Stack Sort Shift Sort Press the Sort or Rotate Sort key When the 2 Tray Finisher is installed Enter the number of copy sets with the number keysSet the original, then press the Start key After all originals are scanned, press the # key Shift Stack StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Sheet Finisher Tray Finisher Select one of the stapling positions Sort/Stack/Staple ⇒ P.51 Stapling position and original setting When Memory Reaches 0% To Remove the Paper from the Staple UnitPress the No key to resume scanning Press the Yes key Punch Holes Punch hole positions Punchable paper sizes are as follows Select the Punch position Enter the number of copy sets with the number keys Copying from the Bypass Tray Open the bypass tray Adjust the guides to copy paper sizeExtender When copying onto custom size paper Press the # key Copying Select OHP Sheet or Thick Paper When Copying onto OHP Transparencies or Thick PaperPress the OK key Set your originals and press the Start key Storing Your Settings ProgramsStoring a Program Deleting a Program Make sure the program settings Deleting a ProgramRepeat steps E and F in Storing a Program Press the Do not Register key Recalling a Program Job Preset Press the Copy key Set up the next copy jobCancel key Press the To Printing key Energy Saver Mode Interrupt Copy Other FunctionsTo interrupt an original being fed Press the Interrupt key Original Beeper Sample CopyTo interrupt copying after all originals have been fed Set your original Press the Start key Press the Continue key Press the Clear/Stop key when Copying is displayedPress the Change Quantity key Preset Reduce/Enlarge Ratio % Paper size Press the Reduce/Enlarge key Create Margin modePress the Enlarge or Reduce key Adjust the ratios with the n or o key ZoomEnter the ratio Press the Mag. Ratio key Enter the desired ratio with the number keys Size Magnification Press the Reduce/Enlarge key Press the Specifid Ratio key Press the OK key Set your original, then press the Start key