Manuals / Savin / Computer Equipment / All in One Printer

Savin 2235, 3502/3502p, 4502/4502p, 2545/2545p, 2245 manual Originals, Metric version, Inch version

Models: 4502/4502p 2245 2545/2545p 3502/3502p 2235 2535/2535p

1 89

Download 89 pages 21.68 Kb

Page 32

AdonisC2_ENcopy122F_FM.book Page 19 Thursday, February 15, 2001 3:23 PM

Originals

Originals

Sizes and Weights of Recommended Originals
Sizes and Weights of Recommended Originals		1

❖ Metric version

Where Original Is Set		Original Size	Original Weight

Exposure glass		Up to A3	--

Document feeder		1-sided originals:	40 – 128g/m2
		A3L – B6KL

		2-sided originals:	52 – 105g/m2
		A3L – A5KL

❖ Inch version

Where Original Is Set		Original Size	Original Weight

Exposure glass		Up to 11" ⋅ 17"	--

Document feeder		1-sided originals:	11 – 34 lb.
		11" ⋅ 17"L – 51/2" ⋅ 81/2"KL

		2-sided originals:	14 – 28 lb.
		11" ⋅ 17"L – 51/2" ⋅ 81/2"KL

Note

❒The number of originals that can be set in the document feeder is about 80.

❒Original weight in Mixed Size mode is 52-81g/m2, 13.8-21.5 lb.

Non-recommended originals for the document feeder

Setting the following types of originals in the document feeder can cause paper misfeeds or damage to the originals. Set these originals on the exposure glass in- stead.

•Originals other than those specified in ⇒ P.19 “Sizes and Weights of Recom- mended Originals”

•Stapled or clipped originals

•Perforated or torn originals

•Curled, folded, or creased originals

•Pasted originals

•Originals with any kind of coating, such as thermal fax paper, art paper, alu- minum foil, carbon paper, or conductive paper

•Originals with perforated lines

19

Image 32

Savin 2235, 3502/3502p, 2245 Originals, Metric version, Inch version, Non-recommended originals for the document feeder

Contents

Zdsh000j.eps ⇒ P.237 Power Connection Means Power ON. c means Stand by FCC Requirements Safety Information Safety During OperationPage How to Read this Manual SymbolsPreparation Limitation Table of Contents Job Preset Other Functions Preset Reduce/EnlargeBasic Functions Sort/Stack/Staple 101 112116 121 149 151156 161 198 202206 207 235 236238 239Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.39 ⇒ P.37103 ⇒ P.77 Guide To Components Bypass tray Right side cover Ventilation hole To copy onto OHP transparencies and translucent paper Output Tray GuideTo copy onto normal paper and thick paper Options Control Panel Function Status indicator Clear/Stop keyNumber keys Function keys Initial copy display Display PanelDisplays and Key Operations Function menu Document Server initial display Function List Based on Options Set the paper of the same size KL in the paper trays Turning On the Power Turning On the Main PowerOperation switch right side of the control panel Main power switch left side of the ma- chine Press the operation switch to make the On indicator goes on Turning On the PowerTurning Off the Power Turning Off the Main Power Changing Modes Originals Metric versionInch version Non-recommended originals for the document feeder Sizes Detectable by the Auto Paper Select Sizes difficult to detect Document feeder Missing Image AreaExposure glass Copy Paper Recommended Paper Sizes and Types Ify the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Non-recommended Paper Paper Storage Used Toner TonerToner Storage Basics Basic Procedure Make sure that the machine is in Copy modeMake sure that there are no previ- ous settings remaining Set your originals System Reset Setting Originals Setting Originals on the Exposure GlassLift the platen cover or the docu- ment feeder Lower the platen cover or docu- ment feeder Setting Originals Document Feeder Original OrientationStandard Orientation Turn Setting Special Originals Batch modePress the key Press the OK key Press the Batch key Mixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Press the Lighter or Darker key to adjust the density Make sure that the Auto Image Den- sity key is selected Selecting Original Type Setting Manual Paper Select Selecting Copy PaperAuto Paper Select Auto Paper Select Make sure that the Auto Paper Select key is selected Rotated copy Select the paper tray Auto Reduce/EnlargePress the Auto Reduce/Enlarge key Sort/Stack/Staple Stack Sort Shift Sort Press the Sort or Rotate Sort key When the 2 Tray Finisher is installed Enter the number of copy sets with the number keysSet the original, then press the Start key After all originals are scanned, press the # key Enter the number of copies with the number keys StackShift Stack Set the original in the same direction as the first one Staple Stapling position and original setting Sheet Finisher Tray Finisher Select one of the stapling positions Sort/Stack/Staple ⇒ P.51 Stapling position and original setting When Memory Reaches 0% To Remove the Paper from the Staple UnitPress the No key to resume scanning Press the Yes key Punch Holes Punch hole positions Punchable paper sizes are as follows Select the Punch position Enter the number of copy sets with the number keys Extender Open the bypass tray Adjust the guides to copy paper sizeCopying from the Bypass Tray When copying onto custom size paper Press the # key Copying Press the OK key Set your originals and press the Start key When Copying onto OHP Transparencies or Thick PaperSelect OHP Sheet or Thick Paper Storing Your Settings ProgramsStoring a Program Deleting a Program Make sure the program settings Deleting a ProgramRepeat steps E and F in Storing a Program Press the Do not Register key Recalling a Program Job Preset Press the Copy key Set up the next copy jobCancel key Press the To Printing key Energy Saver Mode Interrupt Copy Other FunctionsTo interrupt an original being fed Press the Interrupt key Original Beeper Sample CopyTo interrupt copying after all originals have been fed Set your original Press the Start key Press the Change Quantity key Press the Clear/Stop key when Copying is displayedPress the Continue key Preset Reduce/Enlarge Ratio % Paper size Press the Enlarge or Reduce key Create Margin modePress the Reduce/Enlarge key Adjust the ratios with the n or o key ZoomEnter the ratio Press the Mag. Ratio key Enter the desired ratio with the number keys Size Magnification Press the Reduce/Enlarge key Press the Specifid Ratio key Press the OK key Set your original, then press the Start key