Savin 2235, 3502/3502p, 4502/4502p, 2545/2545p, 2245 Basic Functions, Adjusting Copy Image Density

AdonisC2_ENcopy122F_FM.book Page 37 Thursday, February 15, 2001 3:23 PM

Basic Functions

Basic Functions

The following basic functions are ex- plained in this section.

❖Adjusting Copy Image Density

Auto and Manual Image Density

❖Selecting Original Type Setting

Text, Text·Photo, Photo, Pale, Gen- eration Copy

❖Selecting Copy Paper

Auto Paper Select and Manual Pa- per Select

❖Auto Reduce/Enlarge

The machine can choose an appro- priate reproduction ratio based on the paper and original sizes you se- lect.

❖Sort

Copies can be assembled as sets in sequential order.

❖Rotate Sort

Every other copy set is rotated by 90° KLand delivered to the copy tray.

❖Stack (The optional Bridge unit and the optional finisher are required for this function)

Copies can be assembled with each page set.

❖Staple (The optional Bridge unit and the optional finisher are required for this function)

Each copy set can be stapled to- gether.

❖Punch (The optional Bridge unit and the optional 2 Tray finisher are re- quired for this function)

This function is used to make punch holes in copies.

Note

❒You can select functions to be acti- vated when System Reset is turned on, when Energy Saver is turned off, or after the machine is pow- ered on.

❒You can change default settings for basic functions. ⇒ “Settings You Can Change with the User Tools” in System Settings manual.

Adjusting Copy Image Density

You can adjust the copy image densi- ty to match your originals.

There are three types in this function:

❖Auto Image Density

The machine automatically adjusts the image density.

❖Manual Image Density

If you require darker or lighter copies, adjust the image density yourself.

❖Combined Auto and Manual Image Density

Use when copying originals with a dirty background (such as news- papers). You can adjust the fore- ground density while leaving the background unchanged.

2

37