AdonisC2_ENcopy122F_FM.book Page 69 Thursday, February 15, 2001 3:23 PM
Other Functions
To interrupt copying after all originals have been fed
A Press the {Interrupt} key.
The Interrupt indicator goes on.
Note
❒Copying will not stop yet.
B Set your original.
C Press the {Start} key.
The machine stops the original job and starts copying your original.
D When copying is complete, re- move your originals and copies.
E Press the {Interrupt} key again.
The Interrupt indicator goes off.
The previous copy job settings will be restored and the machine will continue copying from where it left off.
Original Beeper
The beeper sounds and an error mes- sage is displayed when you leave your originals on the exposure glass after copying.
Note
❒To cancel this function, ⇒ “Tone:
Original remains” in P.215 “Gener- al Features 2/4”.
Sample Copy
Use this function to check a copy set before making a long copy run.
Limitation
❒This function can be used only
when the Sort function has been |
|
2 | |
turned on. |
|
A Select Sort and any other func- tions, then enter the number of copy sets to be made.
B Set the originals.
C Press the {Sample Copy} key.
One copy set is delivered for proof copying.
D After checking the finish, press the [Print] key if the sample is ac- ceptable.
The number of copies made is the number you specified minus one for the proof copy.
Note
❒If you press the [Suspend] key after checking the finish, return to step A to adjust the copy set- tings as necessary. You can change the settings for Staple, Punch, Duplex, Copy Orienta- tion, Stamp, Margin Adjust, and Cover/Slip Sheet. However, de- pending on the combinations of functions, some settings might not be changed.
❒You cannot use the Sample Copy function after changing the settings.
69
