Savin 4502/4502p, 3502/3502p, 2235 Copying from the Bypass Tray, ⇒ P.22 “Copy Paper”, Extender

AdonisC2_ENcopy122F_FM.book Page 60 Thursday, February 15, 2001 3:23 PM

Copying

Copying from the Bypass Tray

2

Use the bypass tray to copy onto OHP transparencies, adhesive labels, trans- lucent paper, postcards, and copy pa- per that cannot be set in the paper tray.

Note

❒ The machine can automatically de- tect the following sizes as standard size copy paper:

Metric	L		L			L 1			⋅		L
version	A3	, A4			, A5		, 8 /2"				13"
Inch	A3	L		⋅	17"	L	1	⋅			L
version		, 11"				, 8 /2"				14" ,
	81/2" ⋅ 11"L, 51/2" ⋅ 81/2"L

❒ If you do not use the standard size copy paper, you should input ver- tical and horizontal dimensions. The sizes that you can input are as follows:

Metric	• Vertical: 100 – 297mm
version	• Horizontal: 148 – 600mm
Inch	•	Vertical: 3.9" – 11.6"
version	•	Horizontal: 5.8" – 23.4"

A Open the bypass tray.

B Adjust the guides to copy paper size.

Important

❒If the guides are not flush with the copy paper, a skew image or paper misfeeds might occur.

C Lightly insert the copy paper face up until the beeper sounds.

The k indicator on the display au- tomatically goes on.

60

❒When using paper larger than 433

mmin size, set it so that it is fed straight into the machine.

❒When using paper larger than 433

mmin size, the paper may become wrinkled, and may not be fed into the machine, or may cause paper jams.

❒To make copies onto OHP trans- parencies or thick paper exceeding

128g/m2, 35 lb., specify the paper type in ⇒ P.63 “When Copying onto OHP Transparencies or Thick Paper”.

❒The maximum number of sheets you can set at a time depends on the paper type. For details about

paper capacity of the bypass tray,

⇒ P.22 “Copy Paper”.

1.Extender

Note

❒The face side of the paper set is copied on.

❒Do not stack paper over the lim- it mark, otherwise a skew image or paper misfeeds might occur.