System Reset | Savin 4502/4502p, 3502/3502p, 2235, 2545/2545p, 2245

AdonisC2_ENcopy122F_FM.book Page 30 Thursday, February 15, 2001 3:23 PM

Copying

2

-System Reset

The machine returns to its initial con- dition automatically when your job is finished, after a certain period of time. This function is called “System Reset”.

Note

❒You can change the System Reset time. ⇒ “System Reset Timer” in “System Settings manual”.

-Auto Off

The machine turns itself off automat- ically after your job is finished, after a certain period of time. This function is called “Auto Off”.

Note

❒You can change the Auto Off time. ⇒ “Auto Off Timer” in the System Settings manual.

❒Auto Off time function will not op- erate in the following:

• When the warning massage is displayed.

• When the service call massage is displayed.

• When the paper is jammed.

• When the cover is open.

• When "Adding Toner" message is displayed.

• When the toner is being replen- ished.

• When the User Tools/Counter screen is displayed.

•When operations have been suspended during printing.

•When the handset is in use.

•When the On-hook dialing function is in use.

•When a recipient is being regis- tered in the address list or group dial list.

•When the Data In indicator goes on or blinking.

•When the sample print/confi- dential print screens are dis- played.

30

•When fixed warm-up is in progress.

•When the facsimile, printer or other functions are operating.

Image 43

Savin 4502/4502p, 3502/3502p, 2235, 2545/2545p, 2245, 2535/2535p manual System Reset

Contents

Zdsh000j.eps ⇒ P.237 Power Connection FCC Requirements Means Power ON. c means Stand by Safety During Operation Safety InformationPage Limitation How to Read this ManualSymbols Preparation Table of Contents Sort/Stack/Staple Job Preset Other FunctionsPreset Reduce/Enlarge Basic Functions 121 101112 116 161 149151 156 207 198202 206 239 235236 238Page Machine Types What You Can Do with This Machine Copy Mode Series/Book Document Server ⇒ P.77 ⇒ P.39⇒ P.37 103 Guide To Components Ventilation hole Bypass tray Right side cover To copy onto normal paper and thick paper Output Tray GuideTo copy onto OHP transparencies and translucent paper Options Control Panel Function keys Function Status indicatorClear/Stop key Number keys Displays and Key Operations Display PanelInitial copy display Document Server initial display Function menu Function List Based on Options Set the paper of the same size KL in the paper trays Main power switch left side of the ma- chine Turning On the PowerTurning On the Main Power Operation switch right side of the control panel Turning Off the Power Turning On the PowerPress the operation switch to make the On indicator goes on Turning Off the Main Power Changing Modes Non-recommended originals for the document feeder OriginalsMetric version Inch version Sizes difficult to detect Sizes Detectable by the Auto Paper Select Exposure glass Missing Image AreaDocument feeder Recommended Paper Sizes and Types Copy Paper Ify the size. ⇒ P.60 Copying from the Bypass Tray Basics Direction-fixed paper or 2-sided paper Paper Storage Non-recommended Paper Toner Storage TonerUsed Toner Basics Set your originals Basic ProcedureMake sure that the machine is in Copy mode Make sure that there are no previ- ous settings remaining System Reset Lower the platen cover or docu- ment feeder Setting OriginalsSetting Originals on the Exposure Glass Lift the platen cover or the docu- ment feeder Turn Setting Originals Document FeederOriginal Orientation Standard Orientation Press the Batch key Setting Special OriginalsBatch mode Press the key Press the OK key Mixed Size mode Setting Custom Size Originals Clear or Clear/Stop key, and then enter the value again Basic Functions Make sure that the Auto Image Den- sity key is selected Press the Lighter or Darker key to adjust the density Selecting Original Type Setting Auto Paper Select Selecting Copy PaperManual Paper Select Make sure that the Auto Paper Select key is selected Auto Paper Select Rotated copy Press the Auto Reduce/Enlarge key Auto Reduce/EnlargeSelect the paper tray Stack Sort/Stack/Staple Sort Press the Sort or Rotate Sort key Shift Sort After all originals are scanned, press the # key When the 2 Tray Finisher is installedEnter the number of copy sets with the number keys Set the original, then press the Start key Shift Stack StackEnter the number of copies with the number keys Set the original in the same direction as the first one Staple Stapling position and original setting Tray Finisher Sheet Finisher Sort/Stack/Staple Select one of the stapling positions ⇒ P.51 Stapling position and original setting Press the Yes key When Memory Reaches 0%To Remove the Paper from the Staple Unit Press the No key to resume scanning Holes Punch Punch hole positions Select the Punch position Punchable paper sizes are as follows Enter the number of copy sets with the number keys Copying from the Bypass Tray Open the bypass tray Adjust the guides to copy paper sizeExtender Press the # key When copying onto custom size paper Copying Select OHP Sheet or Thick Paper When Copying onto OHP Transparencies or Thick PaperPress the OK key Set your originals and press the Start key Deleting a Program Storing Your SettingsPrograms Storing a Program Press the Do not Register key Make sure the program settingsDeleting a Program Repeat steps E and F in Storing a Program Recalling a Program Press the To Printing key Job PresetPress the Copy key Set up the next copy job Cancel key Press the Interrupt key Energy Saver Mode Interrupt CopyOther Functions To interrupt an original being fed Set your original Press the Start key Original BeeperSample Copy To interrupt copying after all originals have been fed Press the Continue key Press the Clear/Stop key when Copying is displayedPress the Change Quantity key Ratio % Paper size Preset Reduce/Enlarge Press the Reduce/Enlarge key Create Margin modePress the Enlarge or Reduce key Press the Mag. Ratio key Adjust the ratios with the n or o keyZoom Enter the ratio Enter the desired ratio with the number keys Press the Reduce/Enlarge key Press the Specifid Ratio key Size Magnification Press the OK key Set your original, then press the Start key