Savin 2545/2545p, 3502/3502p, 4502/4502p, 2235, 2245, 2535/2535p manual Staple

AdonisC2_ENcopy122F_FM.book Page 50 Thursday, February 15, 2001 3:23 PM

Copying

Staple

The optional finisher and the bridge unit are required to use this function.

Each copy set can be stapled together.

2

Limitation

❒You cannot use the following paper in this function:

•Postcards

•Translucent paper

•OHP transparencies

•Adhesive labels

•Curled paper

•Low stiffness paper

•Paper of different vertical sizes

Note

❒For this mode, the following limitation applies. When the number of copies exceeds the tray capacity, copying stops. In this case, remove the copies from the shift tray and then resume copying.

❖ Metric version

	With 1000-Sheet Finisher	With 2 Tray Finisher
Paper size	A3L, B4L, A4KL, B5K	A3L, B4L, A4KL, B5KL
Stapler	• A4 or smaller: 30 sheets (80g/m2)	• A4 or smaller: 50 sheets (80g/m2)
capacity	• B4 or larger: 20 sheets (80g/m2)	• B4 or larger: 30 sheets (80g/m2)
		• Mixed Size: 30 sheets (80g/m2)
Shift tray	1,000 sheets (80g/m2)	• Finisher shift tray 1: 500 sheets
capacity		(80g/m2)
(A4K) *1		• Finisher shift tray 2: 1,500 sheets
		(80g/m2)

*1 Depending on the number of sheets to be stapled and whether sheets have punched holes or not, the maximum tray capacity might be reduced.

50