Installing the Truecharge™ 2 Battery Charger
Installing the Truecharge™ 2 Battery Charger
WARNING: Shock and Energy Hazards
Be sure to read the safety guidelines and pay attention to all cautions and warnings throughout the installation procedure. The installer is responsible for ensuring compliance with the installation codes for your particular application.
Disconnect all sources of AC and DC power before proceeding.
Installation Sequence
To make charger installation quick and easy, Xantrex recommends that the installation tasks be performed in the following sequence:
1.Mount the charger in position.
2.Connect the DC ground.
3.Install DC wiring including installing required disconnects, fuses, or breakers.
4.Install AC wiring including earth grounds.
5.Power up the charger.
