Ranges of Math Drill Questions

5.Enter your answer. If you make a mistake, press jor N to clear any entered numbers, and enter your answer again.

6.Press e.

•If the answer is correct, “” appears and the next question is displayed.

•If the answer is wrong, “” appears and the same question is displayed. This will be counted as an incorrect answer.

•If you press ewithout entering an answer, the correct answer is displayed and then the next question is displayed. This will be counted as an incorrect answer.

7.Continue answering the series of questions by entering the answer and pressing e.

8.After you ﬁnish, press eand the number and percentage of correct answers are displayed.

9.Press eto return to the initial screen for your current drill.

Math Drill sample

Current question/

Total questions

Question

…

See step 6 above.

…

Number of questions

Operator type

Percentage correct

Correct answers

×Table sample

Total remaining questions

Question

…

See step 6 above.

…

Multiplicand

Order type

Percentage correct

Correct answers

The range of questions for each operator type is as follows.

+Addition operator: “0 + 0” to “20 + 20”

]	Subtraction operator: “0 − 0” to “20 − 20”; answers are
	positive integers and 0.

>Multiplication operator: “1 ⋅ 0” or “0 ⋅ 1” to “12 ⋅ 12”

)	Division operator: “0 ⎟ 1” to “144 ⎟ 12”; answers are
	positive integers from 1 to 12 and 0, dividends of up to
	144, and divisors of up to 12.

+]>) Mixed operators: Questions within all the above ranges are displayed.

COMPLEX NUMBER CALCULATIONS

To carry out addition, subtraction, multiplication, and division using complex numbers, press b3to select CPLX mode.

Results of complex number calculations are expressed using two systems:

①@E: Rectangular coordinate system (The symbol appears.)

②@u: Polar coordinate system (The symbol appears.)

Complex Number Entry

①Rectangular coordinates

x-coordinate +y-coordinate O

or x-coordinate +Oy-coordinate

②Polar coordinates r Qθ

r : absolute value

θ: argument

•On selecting another mode, the imaginary part of any complex number stored in the independent memory (M) and the last answer memory (ANS) will be cleared.

•A complex number expressed in rectangular coordinates with the y-value equal to zero, or expressed in polar coordinates with the angle equal to zero, is treated as a real number.

•Press N1to return the complex conjugate of the speciﬁ ed complex number.

MATRIX CALCULATIONS

You can store and calculate up to four matrices containing up to four rows and four columns each in MATRIX mode.

Press b4to enter MATRIX mode.

Note: You can use the MATH menu in MATRIX mode to edit, recall, and store matrices, as well as to call matrix- speciﬁ c functions.

Entering and Storing Matrices

Before performing matrix calculations, a matrix must be created. Follow the steps below to enter and store matrices.

1.Press b4to enter MATRIX mode.

2.Press N2to bring up the matrix entry screen.

•Any matrix data remaining in the buffer, along with any previously entered, loaded, or calculated matrix data, will be displayed.

3.Deﬁ ne the matrix dimensions (up to four rows by four columns) by entering the required dimensions using the number keys and pressing e.

Matrix dimensions (row ⋅ column)

Element ﬁ elds

Entry ﬁ eld

Matrix entry screen (example)

4.Enter each element in the matrix by entering a value in the entry ﬁ eld and pressing e.

•Each matrix element can display up to seven digits (the decimal point counts as one digit). If an element exceeds seven digits in length, it may be displayed in exponent notation within the matrix.

•A maximum of three rows by three columns can be displayed at one time. Use u, d, l, and r to move the cursor through the matrix.

5.When you have entered a value for each element, press jto exit the matrix entry screen.

6.Press N4and select a memory (matA–matD) to store the newly-created matrix in.

Modifying a stored matrix

1.To load a stored matrix into the matrix entry screen, press N3, then select the memory (matA–matD) that holds the matrix you wish to modify.

•Loading new data into the screen will automatically replace any data that may already exist there.

2.Using the matrix entry screen, you can modify the values of elements in the matrix. Assign new values wherever necessary and press eafter each one.

•If you wish to modify the number of rows or columns, ﬁ rst press jN2. You can then enter new values for the matrix dimensions.

3.When you have ﬁ nished making changes, press jto exit the matrix entry screen.

4.Press N4and select a memory (matA–matD) to store the newly-created matrix in.

Using Matrices in Calculations

Matrices stored in memories (matA–matD) can be used in arithmetic calculations (with the exception of division between matrices) and calculations that use x3, x2, and x−1. You can also use the following matrix-speciﬁc functions that are available in the MATH menu.

dim (matrix name, row, column)	Returns a matrix with dimensions
	changed as speciﬁ ed.

ﬁ ll (value, row, column)	Fills each element with a speciﬁ ed
	value.

cumul matrix name	Returns the cumulative matrix.

aug (matrix name, matrix name)	Appends the second matrix to the
	ﬁ rst matrix as new columns. The ﬁ rst
	and second matrices must have the
	same number of rows.
identity value	Returns the identity matrix with
	speciﬁ ed value of rows and columns.

rnd_mat (row, column)	Returns a random matrix with
	speciﬁ ed values of rows and columns.

det matrix name	Returns the determinant of a square
	matrix.

Math Drill sample

×Table sample