NAD T 754 owner manual Electric Power, Maintenance, Damage Requiring Service

Page 3

SAFETY INFORMATION

ELECTRIC POWER

1Power Sources - Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit.

2Polarization - As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it still does not easily insert into the outlet, please call a qualified service technician to service or replace the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet.

3AC power cord - When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself.

Never handle the AC power plug with wet hands, as this could result in fire or shock.

Power cords should be routed to avoid being severely bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power socket.

Avoid overloading AC outlets and extension cords beyond their capacity, as this could result in fire or shock.

4Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug.

5When not in use - Unplug the AC power cord from the AC outlet if the unit will not be used for several months or more. When the cord is plugged in, a small amount of current continues to flow to the unit, even when the power is turned off.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.

MAINTENANCE

Clean the unit only as recommended in the Operating Instructions.

DAMAGE REQUIRING SERVICE

Have the unit serviced by a qualified service technician if

The AC power plug has been damaged.

Foreign objects or liquid have gotten inside the unit.

The unit has been exposed to rain or water - The unit does not seem to operate normally.

The unit exhibits a marked change in performance.

The unit has been dropped, or the cabinet has been damaged

DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF

OWNER’S RECORD

For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. Please refer to them when you contact your dealer in case of difficulty.

Model No. :

Serial No. :

ENGLISH

3

Image 3
Contents 754 Explanation of Graphical Symbols Safety InformationDo not Attempt to Service the Unit Yourself OWNER’S Record Electric PowerMaintenance Damage Requiring ServiceTable of Contents Using the HTR 2 Remote Control Troubleshooting SpecificationsGetting the Most from the NAD T Choosing a Location Unpacking and SetupConnecting AM Antenna WHAT’S in the BOXIntegration About the TR.S., Matrix and Digital Surround Ease of USEUpgradability About the HTR 2 System Remote ControlPlay a DVD Movie QuickstartSearch Front PanelDigital Input Jack +12V Trigger IN/OUT Rear PanelRear Panel Setting UP the T Getting StartedDealing with HUM and Noise Display the OSD Input SetupInput Settings About the ON-SCREEN Displays OSD and FRONT-PANEL ReadoutSpeaker Setup Speaker SettingsListening Mode Setting Speaker Distance CHANNEL-BALANCE Test SetupUsing AN SPL Meter Setting Channel BalanceRecalling Presets Creating PresetsUsing the T Choosing the FM Mute / Mode Tuning StationsSetting Radio Presets Selecting Radio PresetsDTS NEO 6 Surround DTS ES Expanded Surround DTS ESDTS-ES Discrete DTS ES MatrixDolby PRO Logic II Music Dolby PRO LogicDolby PRO Logic II Surround Dolby PRO Logic II MovieDisplaying the Signal Mode Selecting Listening ModesDTS DTS Neo Adjusting Listening ModesAdjusting the Tone Controls Surround Sound Channel ChartAdjusting Channel Levels on the FLY To Adjust Channel LevelsLearning Codes from Other Remotes Using the HTR 2 Remote ControlSpecifications Controlling the TRecording Macros Copy a Command from Another KEYMacro Commands PUNCH-THROUGHLoading CODE-LIBRARIES KEY-ILLUMINATION TimeoutFactory Reset Delete ModeAssigning the Trigger Output Using the ZR 2 Remote ControlTrigger Setup Summary of HTR 2 ModesCondition Possible Causes Possible Solutionss TroubleshootingAmplifier Section SpecificationsPhysical Specifications AV Surround Sound ReceiverNAD