Installation notes
CAUTION
Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
If peripheral devices are to be installed, do not install on an uneven fl oor, slanted surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install the product on a fl at, stable surface that can withstand the weight of the product.
Do not install in a location with moisture or dust.
Risk of fi re and electrical shock.
If dust enters the machine, dirty output and machine failure may result.
Locations that are excessively hot, cold, humid, or dry (near heaters, humidifiers, air conditioners, etc.)
The paper will become damp and condensation may form inside the machine, causing misfeeds and dirty output. SPECIFICATIONS (page 18)
If the location has an ultrasonic humidifi er, use pure water for humidifi ers in the humidifi er. If tap water is used, minerals and other impurities will be emitted, causing impurities to collect on the inside of the machine and create dirty output.
When the machine is installed, the adjusters (4) must be lowered to the floor to secure the machine (prevent it from moving).
Rotate the adjusters in the locking direction until they are in fi rm contact
Locations with ammonia gas
Installing the machine next to a diazo copy machine may cause dirty output.
Do not install the machine in a location with poor air circulation.
A small amount of ozone is created inside the machine during printing. The amount of ozone created is not suffi cient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide suffi cient air circulation. (The odor may occasionally cause headaches.)
*Install the machine so that people are not directly exposed to exhaust from the machine. If installed near a window, ensure that the machine is not exposed to direct sunlight.
Near a wall
|
| 30 cm | |
Be sure to allow the required space around the machine for |
|
| |
servicing and proper ventilation. (The machine should be no |
|
| |
closer than the distances indicated below from walls. The |
|
| |
indicated distances are for the case when a saddle fi nisher and | 30 cm | 45 cm | |
large capacity paper tray are not installed.) | |||
|
|
with the fl oor.
If you find it necessary to reposition the machine due to rearrangement of your office layout or other reason, retract the adjusters from the floor, turn off the power, and then move the machine.
(After moving the machine, lower the adjusters again to secure the machine.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Lock Release
Locations subject to vibration. |
Vibration may cause failure. |
CAUTION
The machine includes a
•The machine should be installed near an accessible power outlet for easy connection.
•Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker.
8