SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable scanning from the operation panel of the machine.
To scan using the operation panel of the machine, Button Manager must be linked with the scan menu keys on the machine. Follow the steps below to link Button Manager to scanner events.
Windows XP
1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras".
2 Click the "SHARP
3 In the "Properties" screen, click the "Events" tab.
4 Select "ScanMenu SC1" from the "Select an event"
5 Select "Start this program" and then select "Sharp Button Manager A" from the
6 Click the "Apply" button.
7 Repeat Steps 4 through 6 to link Button Manager to "ScanMenu SC2" through "ScanMenu SC6".
Select "ScanMenu SC2" from the "Select an event"
When the settings have been completed, click the "OK" button to close the screen.
Button Manager is now linked to the scan menu keys (1 through 6).
The scan settings for each of scan menu keys 1 through 6 can be changed in the setting window of Button Manager.
For the factory default settings of the scan menu keys, see "USING THE SCANNER MODE" in the Operation Manual. For the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual.
12