INSTALLING THE SOFTWARE
• | In the following explanations it is assumed that the mouse is configured for right hand operation. |
Note • | The scanner feature only works when using a USB cable. |
•If an error message appears, follow the instructions on the screen to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
•When installing Sharpdesk, a minimal version of Internet Explorer 5.01 will be installed on your computer if your computer does not currently have Internet Explorer version 4.01 or later
INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE)
1 | The USB or parallel cable must not be | • | If you are using a parallel cable, do not |
Note | select the Button Manager checkbox (this | ||
| connected to the machine. Make sure |
| feature is not supported when a parallel |
| that the cable is not connected before |
| |
|
| cable is used). | |
| proceeding. | • | If the following screen appears, click the |
| If the cable is connected, a Plug and Play window |
| "OK" button. For the software that can be |
| will appear. If this happens, click the "Cancel" button |
| installed, see "INSTALLATION |
|
| ENVIRONMENT AND USEABLE | |
| to close the window and disconnect the cable. |
| |
|
| SOFTWARE" (p. 3). | |
|
|
| |
| Note The cable will be connected in step 11. |
|
|
2 Insert the
3 Click the "start" button, click "My Computer" ( 
), and then 
).
4 
).
If the language selection screen appears after Note you double click the "setup" icon, select the
language you wish to use and click the "Next" button. (Normally the correct language is selected automatically.)
5 Select the software packages to be installed and then click the "Next" button.
Software packages with a checkmark ( 
) in the list on the screen will be installed.
Click the "Display README" button to show information on packages that are selected.
6 Check the packages on the screen, and then click the "Start" button.
The software packages to be installed will be displayed on the screen. If an incorrect package is displayed, click the "Back" button and select the correct packages.
4