Sharp PN-L802B, PN-LB02B, PNL802BPKG2A operation manual 13 E, Connecting Peripheral Equipment

Page 13

Connection when the PN-ZB01 (optional) is attached

The PN-ZB01 expansion board (optional) allows the use of additional connection terminals.

7. PC/AV DVI-D input terminal

Set DVI of INPUT SELECT on the OPTION menu according to the device to be connected.

Select the audio input terminal to be used in PC DVI-D or AV DVI-D of AUDIO SELECT on the OPTION menu.

8. PC RGB input terminals

Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals.

Select the audio input terminal to be used in PC RGB of AUDIO SELECT on the OPTION menu.

9. AV component input terminals

Set BNC of INPUT SELECT on the OPTION menu to AV COMPONENT when using the AV component input terminals.

Select the audio input terminal to be used in AV COMPONENT of AUDIO SELECT on the OPTION menu.

Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV COMPONENT.

10. AV video input terminal

Select the audio input terminal to be used in AV VIDEO of AUDIO SELECT on the OPTION menu.

Cannot be used when D-SUB in INPUT SELECT on the OPTION menu is set to AV VIDEO.

11. AV S-video input terminal

Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu.

12.Audio1 input terminals / Audio2 input terminals

• Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu.

13.LAN terminal

You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network.

Connecting Peripheral Equipment

14. External speaker terminals

To use external speakers, set SPEAKER SELECT on the SETUP menu to EXTERNAL.

Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 7 W.

1

2

3

 

Approx.

 

 

3-15/16 inch

 

 

(10 cm)

 

1.Attach a speaker cable core (included with the PN-ZB01) to the end of the speaker cable connected to the monitor.

2.While pushing the tab, insert the tip of the cable.

3.Release the tab.

TIPS

Be sure to connect the + and - terminals and the left and right speakers properly.

Avoid short circuiting the + and - terminals.

When SPEAKER SELECT is set to EXTERNAL, the internal speakers are disabled.

15. PC/AV DVI-D output terminal

The video of the PC/AV DVI-D input can be output to an external device.

Outputting HDCP-encrypted video requires an external device which supports HDCP.

This terminal allows the daisy chain connection of up to 5 monitors.

TIPS

The length of the signal cables or surrounding environment may affect the image quality.

The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF.

Video output is disabled in the following cases: When the power is turned off

When the monitor is in input signal waiting mode

13 E

Image 13
Contents PN-L802B GREEN-AND-YELLOW For Customers in U.KBlue BrownImportant Information Refer Servicing to Qualified Service PersonnelInformation on Disposal for Business Users Information on Disposal for Users private householdsEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions Mounting Precautions Supplied Components ContentsSystem Requirements NFront view Part NamesNRear view Signal transmitter NRemote control unit Part NamesPower button See Mute button See 11 EConnection with a PC or AV equipment Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentBinding Cables Connecting the Power CordRemoving the Handles Installing the batteries Preparing the Remote Control UnitRemote control operation range 15 ETurning power on/off Turning Power On/OffTurning on the main power PowerNDate/time setting Disabling power on/off operationsTurning Power On/Off 17 ETouch action and touch mode Inserting the batteryTouch Pen Preparations/Touch Action Touch actionTouch Pen Preparations/Touch Action 19 ENFinger actions Eraser Other functionsNPen actions 21 E Basic OperationMute MenuWide Zoom Normal Basic Operation NSwitching the screen sizeDot by Dot Cut off23 E Menu ItemsDisplaying the menu screen Menu Items Menu item detailsNSCREEN NPICTURE25 E Menu Items NSETUPNAUDIO NOPTION Menu Items NPIP/PbyP 27 EMenu Items NDual screen display NZOOM2 Special SettingPIP PbyP29 E PowerNSCHEDULE DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 31 E Controlling the Monitor with a PC RS-232C Communication procedurePC connection Communication conditionsNResponse code format 33 ENID numbers VOLM0030 002VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←35 E Setting of the Gamma user dataPower control/Input mode selection RS-232C command tableHow to read the command table Command Command field See DirectionControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu 39 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu 41 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataControlling the Monitor with a PC LAN Settings to connect to a LAN43 E To set on the monitorControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Controlling with a PC 45 EControlling the Monitor with a PC LAN Basic operationInformation about this monitor appears Standby mode, Power on is the operation available47 E User Name / PasswordDNS Server Accept IP AddressAuthentication Installation Information NAME/LOCATIONAccount Name / Password Monitor NameRecipient E-MAIL Addresses 49 ECondition ConfirmationTrap Setting Snmp SettingTrap Setting of Authentication Error Version51 E TroubleshootingWhen Auto Dimming is displayed TroubleshootingMonitor makes a cracking sound NProduct Specifications Specifications53 E NPower management Specifications NDimensional DrawingsDmpm Digital Monitor Power Management NDDC plug and playNCompatible signal timing AV Specifications NCompatible signal timing PC55 E NPC D-sub input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pins57 E Secure using 2 cover screws M4 with washers suppliedNRemoving the temporary stand NAttaching the TrayPN-L802B Mu EN12A1
Related manuals
Manual 9 pages 43.56 Kb Manual 9 pages 52.67 Kb Manual 28 pages 7.54 Kb

PNL802BPKG2A, PN-LB02B, PNL802B, PN-L802B specifications

The Sharp PN-L802B, PN-L602B, PN-L702B, and PNL802B and PNL602B are a series of cutting-edge interactive displays that focus on enhancing collaboration and communication in various settings, including educational institutions, corporate environments, and creative studios. These models are designed to transform the way users engage with content, enabling seamless collaboration and improving overall productivity.

One of the standout features of the Sharp PN-L series is its large-sized display technology, with models such as the PN-L802B boasting an impressive 80-inch diagonal screen and the PN-L602B offering a 60-inch option. These expansive screens provide vivid visuals with 4K Ultra HD resolution, delivering stunning clarity and detail that captivates viewers. The enhanced brightness and wide viewing angles ensure that content is easily viewable from various positions in the room.

Touch technology is another defining characteristic of the Sharp PN-L series. The displays utilize advanced infrared touch technology, allowing for up to 10 points of simultaneous touch. This multi-touch capability enables multiple users to interact with the display at the same time, fostering a dynamic and interactive experience for collaboration and brainstorming sessions. The seamless touch responsiveness enhances user engagement, making it easier to navigate content and annotate directly on the screen.

The models also come equipped with Sharp's powerful software solutions, such as the easy-to-use Sharp Pen Software, which allows users to write and draw directly on the screen, making annotations and modifications in real-time. Additionally, the displays support various connectivity options, including HDMI, USB-C, and wireless sharing, facilitating easy integration with other devices and systems.

Moreover, the PN-L series is designed with a focus on durability and ease of use. The anti-glare surface reduces reflections and distractions, while the ergonomic design ensures that the displays can be easily installed at convenient heights for user interaction. Enhanced security features are also built in, safeguarding content and user data.

In summary, the Sharp PN-L802B, PN-L602B, PN-L702B, PNL802B, and PNL602B bring together large-scale interactive technology, rich visuals, and collaborative features that set a new standard for interactive displays. Their versatility and advanced capabilities make them an ideal choice for any environment where teamwork and communication are pivotal.