Sharp PN-LB02B, PN-L802B, PNL802BPKG2A operation manual 31 E

Page 31

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

You can return the settings to their factory-preset values and restrict operations.

1.Hold SIZE down until “F” appears in the upper left corner of the screen.

2.While “F” appears, press , , , in that order.

FUNCTION

1/1

 

 

 

 

 

 

ALL RESET

 

OFF

 

ADJUSTMENT LOCK

 

ADJUSTMENT LOCK TARGET

 

 

 

RS-232C

UNLOCKED

 

OSD DISPLAY

ON1

 

LED

ON

 

TEMPERATUREALERT

LED

 

STATUSALERT

OFF

 

POWER BUTTON

MONITOR

 

CONTROLLER INPUT

 

 

 

END…[MENU]

3. Select and set the items.

ALL RESET

Resets the settings to the factory default settings.

Press , select ALL RESET, and then press MENU .

After initialization, turn the main power switch off and then back on.

When the PN-ZB01 (optional) is attached, press ,

select the resetting method, and then press MENU .

ALL RESET1 ....Resets all the settings to the factory

default settings.

ALL RESET2 ....Returns all settings to the factory default

settings except for the following items: LAN SETUP, RS-232C/LAN SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 26, and pages 47 to 50.)

ADJUSTMENT LOCK

You can disable operations on the monitor and the remote control unit that use buttons.

OFF ...Enables operation.

ON 1 ..Disables all operations other than turning power on/off and FUNCTION.

ON 2 ..Only the FUNCTION operation is enabled. Disables all operations other than FUNCTION (not even power on/off).

ADJUSTMENT LOCK TARGET

Sets the target to prohibit operation of with

ADJUSTMENT LOCK.

 

REMOTE CONTROL

Prohibits remote control

 

operation

MONITOR BUTTONS ...

Prohibits monitor button

 

operation

BOTH

Prohibits remote control and

 

monitor button operation

RS-232C

(RS-232C/LAN when the PN-ZB01 (optional) is attached)

Specifies whether to allow control via RS-232C or LAN (see pages 32 and 43).

OSD DISPLAY

Shows/hides the menu, modes, and messages. The FUNCTION screen cannot be hidden.

ON 1

Shows all menus, modes and messages.

ON 2

Hides messages automatically displayed

 

by the display. Shows messages during

 

operation.

OFF

Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

OFF cannot be selected when STANDBY MODE is LOW POWER.

TEMPERATURE ALERT

Selects the notification method for an abnormal temperature.

OFF

Do not notify about an abnormal

 

temperature.

OSD & LED ..

When an abnormal temperature is

 

detected, the power LED flashes in red

 

and green alternately and the screen

 

displays a message: TEMPERATURE.

LED

When an abnormal temperature is

 

detected, the power LED flashes in red

 

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF

Do not notify about the error.

OSD & LED ..

When a hardware error is detected, the

 

power LED flashes in red and the screen

 

displays a message: STATUS [xxxx].

LED

When a hardware error is detected, the

 

power LED flashes in red.

POWER BUTTON

Normally, leave this setting as MONITOR.

When using an optional part, if instruction appears, change the setting accordingly.

CONTROLLER INPUT

Normally, you do not need to change this setting. When using an optional part, if instruction appears, change the setting accordingly.

4. Press MENU to return to the normal screen.

TIPS

When both abnormal temperature and hardware error are detected, the hardware error notification overrides.

If TEMPERATURE ALERT or STATUS ALERT is set to OSD&LED, alert messages will appear even if the OSD DISPLAY is set to ON 2 or OFF.

If TEMPERATURE ALERT or STATUS ALERT is set to LED or OSD & LED, the LED lights even if the LED function is set to OFF.

31 E

Image 31
Contents PN-L802B Brown For Customers in U.KGREEN-AND-YELLOW BlueImportant Information Refer Servicing to Qualified Service PersonnelOther Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionDear Sharp Customer Safety Precautions Tips and Safety Instructions Mounting Precautions Supplied Components ContentsSystem Requirements NFront view Part NamesNRear view 11 E NRemote control unit Part NamesSignal transmitter Power button See Mute button SeeConnection with a PC or AV equipment Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentBinding Cables Connecting the Power CordRemoving the Handles 15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangePower Turning Power On/OffTurning power on/off Turning on the main power17 E Disabling power on/off operationsNDate/time setting Turning Power On/OffTouch action Inserting the batteryTouch action and touch mode Touch Pen Preparations/Touch ActionTouch Pen Preparations/Touch Action 19 ENFinger actions Eraser Other functionsNPen actions Menu Basic Operation21 E MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by Dot23 E Menu ItemsDisplaying the menu screen NPICTURE Menu item detailsMenu Items NSCREEN25 E Menu Items NSETUPNAUDIO NOPTION Menu Items NPIP/PbyP 27 EPbyP NZOOM2 Special SettingMenu Items NDual screen display PIPDAY of the Week Power29 E NSCHEDULENAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 31 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connectionNResponse code format 33 ENID numbers OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←35 E Setting of the Gamma user dataCommand Command field See Direction RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu 39 E Setup menuControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu 41 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 43 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 45 EControlling with a PC Controlling the Monitor with a PC LANInformation about this monitor appears Standby mode, Power on is the operation availableAccept IP Address User Name / Password47 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 49 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error51 E TroubleshootingWhen Auto Dimming is displayed TroubleshootingMonitor makes a cracking sound NProduct Specifications Specifications53 E NDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power ManagementNCompatible signal timing AV Specifications NCompatible signal timing PC55 E NPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pinsNAttaching the Tray Secure using 2 cover screws M4 with washers supplied57 E NRemoving the temporary standPN-L802B Mu EN12A1
Related manuals
Manual 9 pages 43.56 Kb Manual 9 pages 52.67 Kb Manual 28 pages 7.54 Kb

PNL802BPKG2A, PN-LB02B, PNL802B, PN-L802B specifications

The Sharp PN-L802B, PN-L602B, PN-L702B, and PNL802B and PNL602B are a series of cutting-edge interactive displays that focus on enhancing collaboration and communication in various settings, including educational institutions, corporate environments, and creative studios. These models are designed to transform the way users engage with content, enabling seamless collaboration and improving overall productivity.

One of the standout features of the Sharp PN-L series is its large-sized display technology, with models such as the PN-L802B boasting an impressive 80-inch diagonal screen and the PN-L602B offering a 60-inch option. These expansive screens provide vivid visuals with 4K Ultra HD resolution, delivering stunning clarity and detail that captivates viewers. The enhanced brightness and wide viewing angles ensure that content is easily viewable from various positions in the room.

Touch technology is another defining characteristic of the Sharp PN-L series. The displays utilize advanced infrared touch technology, allowing for up to 10 points of simultaneous touch. This multi-touch capability enables multiple users to interact with the display at the same time, fostering a dynamic and interactive experience for collaboration and brainstorming sessions. The seamless touch responsiveness enhances user engagement, making it easier to navigate content and annotate directly on the screen.

The models also come equipped with Sharp's powerful software solutions, such as the easy-to-use Sharp Pen Software, which allows users to write and draw directly on the screen, making annotations and modifications in real-time. Additionally, the displays support various connectivity options, including HDMI, USB-C, and wireless sharing, facilitating easy integration with other devices and systems.

Moreover, the PN-L series is designed with a focus on durability and ease of use. The anti-glare surface reduces reflections and distractions, while the ergonomic design ensures that the displays can be easily installed at convenient heights for user interaction. Enhanced security features are also built in, safeguarding content and user data.

In summary, the Sharp PN-L802B, PN-L602B, PN-L702B, PNL802B, and PNL602B bring together large-scale interactive technology, rich visuals, and collaborative features that set a new standard for interactive displays. Their versatility and advanced capabilities make them an ideal choice for any environment where teamwork and communication are pivotal.