Sharp PN-LB02B Controlling the Monitor with a PC LAN To set from a PC, Default Gateway 0.0

Page 44

Controlling the Monitor with a PC (LAN)

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be configured via PC.

Set up process

(1)Connect your monitor to a PC

(2)Specify the PC’s IP address

(3)Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this monitor.

LAN terminal

PC

To LAN terminal

LAN cable

(commercially available, crossover)

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily change the settings on the PC.

This explanation is based on Windows 7.

1.Log on to the PC with an administrator account.

2.Click [Start], and then click “Control Panel”.

3.Click “View network status and tasks” in “Network and

Internet”.

In “Classic View”, click “Network and Sharing Center”.

4.Click “Local Area Connection” and then “Properties”.

5.Click “Internet Protocol Version 4 (TCP/IPv4)” and then

“Properties”.

6.Make a note of the current IP address, subnet mask, and default gateway settings.

Make sure you write this information now as you will be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards.

7.Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set as follows.

IP Address: 192.168.150.1

Subnet Mask: 255.255.255.0

Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below. (When DHCP CLIENT is set to OFF)

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 0.0.0.0

(3)Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1.Turn the power ON to the monitor.

2.Set RS-232C/LAN SELECT on the SETUP menu to LAN.

3.Set DHCP CLIENT to OFF in LAN SETUP on the SETUP menu.

PC operation

4.Launch Internet Explorer, in the “Address” box type “http://192.168.150.2/” and press the Enter key.

You will be prompted to enter a user name and password.

5.Leave the user name and password boxes blank and click [OK].

E44

Image 44
Contents PN-L802B For Customers in U.K GREEN-AND-YELLOWBlue BrownRefer Servicing to Qualified Service Personnel Important InformationInformation on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUDear Sharp Customer Safety Precautions Tips and Safety Instructions Mounting Precautions System Requirements ContentsSupplied Components NRear view Part NamesNFront view NRemote control unit Part Names Signal transmitterPower button See Mute button See 11 EConnecting Peripheral Equipment Connection with a PC or AV equipmentConnecting Peripheral Equipment 13 ERemoving the Handles Connecting the Power CordBinding Cables Preparing the Remote Control Unit Installing the batteriesRemote control operation range 15 ETurning Power On/Off Turning power on/offTurning on the main power PowerDisabling power on/off operations NDate/time settingTurning Power On/Off 17 EInserting the battery Touch action and touch modeTouch Pen Preparations/Touch Action Touch actionNFinger actions 19 ETouch Pen Preparations/Touch Action NPen actions Other functionsEraser Basic Operation 21 EMute MenuBasic Operation NSwitching the screen size Wide Zoom NormalDot by Dot Cut offDisplaying the menu screen Menu Items23 E Menu item details Menu ItemsNSCREEN NPICTURENAUDIO Menu Items NSETUP25 E NOPTION 27 E Menu Items NPIP/PbyPNZOOM2 Special Setting Menu Items NDual screen displayPIP PbyPPower 29 ENSCHEDULE DAY of the WeekNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 31 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditionsNID numbers 33 ENResponse code format 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 35 ERS-232C command table Power control/Input mode selectionHow to read the command table Command Command field See Direction37 E Controlling the Monitor with a PC RS-232C Screen menuControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Audio menu Setup menu39 E Controlling the Monitor with a PC RS-232C Option menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu41 E Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN43 E To set on the monitorDefault Gateway 0.0 Controlling the Monitor with a PC LAN To set from a PC45 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationStandby mode, Power on is the operation available Information about this monitor appearsUser Name / Password 47 EDNS Server Accept IP AddressInstallation Information NAME/LOCATION AuthenticationAccount Name / Password Monitor Name49 E Recipient E-MAIL AddressesCondition ConfirmationSnmp Setting Trap SettingTrap Setting of Authentication Error VersionTroubleshooting 51 EMonitor makes a cracking sound TroubleshootingWhen Auto Dimming is displayed 53 E SpecificationsNProduct Specifications Specifications NDimensional Drawings NPower managementDmpm Digital Monitor Power Management NDDC plug and play55 E Specifications NCompatible signal timing PCNCompatible signal timing AV Specifications NPC/AV DVI-D input terminal pins NPC D-sub input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pinsSecure using 2 cover screws M4 with washers supplied 57 ENRemoving the temporary stand NAttaching the TrayPN-L802B Mu EN12A1
Related manuals
Manual 9 pages 43.56 Kb Manual 9 pages 52.67 Kb Manual 28 pages 7.54 Kb

PNL802BPKG2A, PN-LB02B, PNL802B, PN-L802B specifications

The Sharp PN-L802B, PN-L602B, PN-L702B, and PNL802B and PNL602B are a series of cutting-edge interactive displays that focus on enhancing collaboration and communication in various settings, including educational institutions, corporate environments, and creative studios. These models are designed to transform the way users engage with content, enabling seamless collaboration and improving overall productivity.

One of the standout features of the Sharp PN-L series is its large-sized display technology, with models such as the PN-L802B boasting an impressive 80-inch diagonal screen and the PN-L602B offering a 60-inch option. These expansive screens provide vivid visuals with 4K Ultra HD resolution, delivering stunning clarity and detail that captivates viewers. The enhanced brightness and wide viewing angles ensure that content is easily viewable from various positions in the room.

Touch technology is another defining characteristic of the Sharp PN-L series. The displays utilize advanced infrared touch technology, allowing for up to 10 points of simultaneous touch. This multi-touch capability enables multiple users to interact with the display at the same time, fostering a dynamic and interactive experience for collaboration and brainstorming sessions. The seamless touch responsiveness enhances user engagement, making it easier to navigate content and annotate directly on the screen.

The models also come equipped with Sharp's powerful software solutions, such as the easy-to-use Sharp Pen Software, which allows users to write and draw directly on the screen, making annotations and modifications in real-time. Additionally, the displays support various connectivity options, including HDMI, USB-C, and wireless sharing, facilitating easy integration with other devices and systems.

Moreover, the PN-L series is designed with a focus on durability and ease of use. The anti-glare surface reduces reflections and distractions, while the ergonomic design ensures that the displays can be easily installed at convenient heights for user interaction. Enhanced security features are also built in, safeguarding content and user data.

In summary, the Sharp PN-L802B, PN-L602B, PN-L702B, PNL802B, and PNL602B bring together large-scale interactive technology, rich visuals, and collaborative features that set a new standard for interactive displays. Their versatility and advanced capabilities make them an ideal choice for any environment where teamwork and communication are pivotal.