Sharp PNL802B, PN-LB02B Preparing the Remote Control Unit, 15 E, Installing the batteries

Page 15

Preparing the Remote Control Unit

Installing the batteries

1.Press the cover gently and slide it in the direction of the arrow.

2.See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly.

3.Close the cover.

TIPS

•When the batteries become exhausted, replace them with new (commercially available) batteries.

•The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on how they are stored.

•If you will not be using the remote control for a long time, remove the batteries.

•Use manganese or alkaline batteries only.

Remote control operation range

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor.

 

Remote

 

control sensor

10°

 

16.4

 

 

feet

10°

10°

(5 m)

 

 

10°

 

TIPS

•Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

•Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

•The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

•Objects between the remote control unit and the remote control sensor may prevent proper operation.

•Replace the batteries when they run low as this may shorten the remote control’s operation range.

•If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

•Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

15 E

Page 14 Page 16
Image 15
Page 14 Page 16
Contents PN-L802B Brown For Customers in U.KGREEN-AND-YELLOW BlueImportant Information Refer Servicing to Qualified Service PersonnelOther Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionDear Sharp Customer Safety Precautions Tips and Safety Instructions Mounting Precautions Contents Supplied ComponentsSystem Requirements Part Names NFront viewNRear view 11 E NRemote control unit Part NamesSignal transmitter Power button See Mute button SeeConnection with a PC or AV equipment Connecting Peripheral Equipment13 E Connecting Peripheral EquipmentConnecting the Power Cord Binding CablesRemoving the Handles 15 E Preparing the Remote Control UnitInstalling the batteries Remote control operation rangePower Turning Power On/OffTurning power on/off Turning on the main power17 E Disabling power on/off operationsNDate/time setting Turning Power On/OffTouch action Inserting the batteryTouch action and touch mode Touch Pen Preparations/Touch Action19 E Touch Pen Preparations/Touch ActionNFinger actions Other functions EraserNPen actions Menu Basic Operation21 E MuteCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotMenu Items 23 EDisplaying the menu screen NPICTURE Menu item detailsMenu Items NSCREENMenu Items NSETUP 25 ENAUDIO NOPTION Menu Items NPIP/PbyP 27 EPbyP NZOOM2 Special SettingMenu Items NDual screen display PIPDAY of the Week Power29 E NSCHEDULEAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 31 E Communication conditions Communication procedureControlling the Monitor with a PC RS-232C PC connection33 E NResponse code formatNID numbers OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ← 002VOLM0030 VOLM0020 ←35 E Setting of the Gamma user dataCommand Command field See Direction RS-232C command tablePower control/Input mode selection How to read the command tableControlling the Monitor with a PC RS-232C Screen menu 37 EControlling the Monitor with a PC RS-232C Picture menu Setup menu 39 EControlling the Monitor with a PC RS-232C Audio menu Controlling the Monitor with a PC RS-232C Option menu Initialization/Functional Restriction Setting Function menu 41 EControlling the Monitor with a PC RS-232C PIP/PbyP menu Controlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user dataTo set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN 43 EControlling the Monitor with a PC LAN To set from a PC Default Gateway 0.0Basic operation 45 EControlling with a PC Controlling the Monitor with a PC LANInformation about this monitor appears Standby mode, Power on is the operation availableAccept IP Address User Name / Password47 E DNS ServerMonitor Name Installation Information NAME/LOCATIONAuthentication Account Name / PasswordConfirmation 49 ERecipient E-MAIL Addresses ConditionVersion Snmp SettingTrap Setting Trap Setting of Authentication Error51 E TroubleshootingTroubleshooting When Auto Dimming is displayedMonitor makes a cracking sound Specifications NProduct Specifications53 E NDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power ManagementSpecifications NCompatible signal timing PC NCompatible signal timing AV55 E NPC/AV Hdmi input terminal pins Specifications NPC/AV DVI-D input terminal pinsNPC D-sub input terminal pins NPC/AV DVI-D output terminal pinsNAttaching the Tray Secure using 2 cover screws M4 with washers supplied57 E NRemoving the temporary standPN-L802B Mu EN12A1
Related manuals
Manual 9 pages 43.56 Kb Manual 9 pages 52.67 Kb Manual 28 pages 7.54 Kb

PNL802BPKG2A, PN-LB02B, PNL802B, PN-L802B specifications

The Sharp PN-L802B, PN-L602B, PN-L702B, and PNL802B and PNL602B are a series of cutting-edge interactive displays that focus on enhancing collaboration and communication in various settings, including educational institutions, corporate environments, and creative studios. These models are designed to transform the way users engage with content, enabling seamless collaboration and improving overall productivity.

One of the standout features of the Sharp PN-L series is its large-sized display technology, with models such as the PN-L802B boasting an impressive 80-inch diagonal screen and the PN-L602B offering a 60-inch option. These expansive screens provide vivid visuals with 4K Ultra HD resolution, delivering stunning clarity and detail that captivates viewers. The enhanced brightness and wide viewing angles ensure that content is easily viewable from various positions in the room.

Touch technology is another defining characteristic of the Sharp PN-L series. The displays utilize advanced infrared touch technology, allowing for up to 10 points of simultaneous touch. This multi-touch capability enables multiple users to interact with the display at the same time, fostering a dynamic and interactive experience for collaboration and brainstorming sessions. The seamless touch responsiveness enhances user engagement, making it easier to navigate content and annotate directly on the screen.

The models also come equipped with Sharp's powerful software solutions, such as the easy-to-use Sharp Pen Software, which allows users to write and draw directly on the screen, making annotations and modifications in real-time. Additionally, the displays support various connectivity options, including HDMI, USB-C, and wireless sharing, facilitating easy integration with other devices and systems.

Moreover, the PN-L series is designed with a focus on durability and ease of use. The anti-glare surface reduces reflections and distractions, while the ergonomic design ensures that the displays can be easily installed at convenient heights for user interaction. Enhanced security features are also built in, safeguarding content and user data.

In summary, the Sharp PN-L802B, PN-L602B, PN-L702B, PNL802B, and PNL602B bring together large-scale interactive technology, rich visuals, and collaborative features that set a new standard for interactive displays. Their versatility and advanced capabilities make them an ideal choice for any environment where teamwork and communication are pivotal.
Top Page Image Contents