Sharp XR-32S-L, XR-32X-L quick start How to Access the PDF Operation Manuals, Info, Introduction

Page 13
Caution regarding usage of the projector

Caution regarding usage of the projector

If you are not to use the projector for a long time or before moving the projector, make certain you unplug the power cord from the wall outlet, and disconnect any other cables connected to it.

If the power cord is unplugged while the cool- ing fan is running, some parts of the projec- tor may still be hot. Use caution when han- dling the projector.

Do not carry the projector by holding the lens.

When storing the projector, ensure you at- tach the lens cap to the projector. (See page 11.)

Do not expose the projector to direct sunlight or place next to heat sources. Doing so may affect the cabinet color or cause deformation of the plastic cover.

Other connected equipment

When connecting a computer or other audio- visual equipment to the projector, make the connections AFTER unplugging the power cord of the projector from the AC outlet and turning off the equipment to be connected.

Please read the operation manuals of the pro- jector and the equipment to be connected for instructions on how to make the connections.

Using the projector in other countries

The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, make sure you use an appropriate power cord for the country you are in.

Temperature monitor function

If the projector starts to overheat due to setup

problems or blockage of the air vents, Ò Other connected equipmentÓ and

Ò Using the projector in other countries Ó will illuminate in the lower left corner of the picture. If the temperature continues to rise, the lamp will turn off, the temperature warn- ing indicator on the projector will blink, and after a 60-second cooling-off period the projector will enter standby mode. Refer to ÒMaintenance In- dicatorsÓ on page 50 for details.

Temperature monitor function Info

The cooling fan regulates the internal tem- perature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. This does not indicate malfunc- tion.

Introduction

How to Access the PDF Operation Manuals

PDF operation manuals in several languages are included in the CD-ROM. To uti- lize these manuals, you need to install Adobe® Reader® on your computer (Win- dows® or Macintosh®).

Please download Adobe¨ Reader¨ from the Internet (http://www.adobe.com).

Accessing the PDF Manuals for Windows® (For Macintosh®, skip step 2).

1 Insert the CD-ROM in the CD-ROM drive.

6 Double click the language (name of the

2 Double click the ÒMy ComputerÓ icon.

folder) that you want to view.

3 Double click the ÒCD-ROMÓ drive.

7 Double click the pdf file to access the pro-

4 Double click the ÒMANUALSÓ folder.

jector manuals.

5Double click the model (name of the folder) that you want to view.

 Info Note

If the desired pdf file cannot be opened by double clicking the mouse, start Adobe® Reader® first, then specify the desired file using the “File”, “Open” menu.

9

Image 13
Contents Features SetupXR-32X-L XR-32S-L OPERATION MANUALModel No Serial No DANGER SPECIAL NOTE FOR USERS IN THE U.KThe supplied CD-ROM contains operation instructions in English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese, Korean and Arabic. Carefully read through the operation instructions before operating the projector 2. CONSUMER PRODUCT SAFETY ACT 1. WARRANTYIntroduction IntroductionENGLISHINFORMATION Caution Concerning Lamp ReplacementDeclaration of conformity PRODUCT DISPOSALTroubleshooting MaintenanceFor Future Reference IndexUsing ContentsSetup Useful FeaturesAppendix Reference5. Cleaning IMPORTANT SAFEGUARDS8. Accessories 11. Power Sources19. Replacement Parts 18. Damage Requiring Service20. Safety Check 15. OverloadingCaution concerning the setup of the projector Observe the following safeguards when setting up your projectorCaution concerning the lamp unit Warning about placing the projector in a high positionInfo How to Access the PDF Operation ManualsUsing the projector in other countries Accessing the PDF Manuals for Windows For Macintosh, skip stepSupplied accessories AccessoriesOptional accessories Projector Part Names and FunctionsIntroduction Top ViewRear View Part Names and Functions ContinuedUsing the Kensington Lock TerminalsFor moving the For selecting and adjusting menu itemsFor the Left click For changing the pointer or spot2 Insert the batteries Inserting the BatteriesUsable Range Quick Start Setup and Projection1. Place the projector facing a wall or a screen 3. Remove the lens cap and turn the projector on7. Turn the computer on 8. Turn the power off 4. Adjust the projected image with the Setup Guide5. Correct trapezoidal distortion 6. Select the INPUT modeSetting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode SetupIndication of the Projection Image Size and Projection Distance Screen Size and Projection Distance Setting up the Projector ContinuedNORMAL Mode STRETCH ModeTerminals on the Projector Connecting the Projector to Other EquipmentConnections Example Terminals of XR-32XConnecting the Projector to Other Equipment Continued is only for XR-32X Controlling the Projector by a Computer Connecting the Power CordPlug the supplied power cord into the AC socket on the rear of the projector Then plug into AC outletTurning the Projector on Turning the Projector On/OffOperationBasic Turning the Power off Putting the Projector into Standby ModeAdjusting the Projected Image 1 Adjusting the Focus About the Setup Guide2 Adjusting the Picture Size Image Projection3 Adjusting the Height Correcting Trapezoidal Distortion Image Projection Continued2 Press P/Q or O/R to adjust the Keystone Correction 1 Press KEYSTONE to enter the Keystone Correction modeAdjusting the Volume Switching the Input ModeDisplaying the Black Screen and Turning off the Sound Temporarily Press VOL +/- on the remote control orCOMPUTER Resize ModePress RESIZE VIDEO/DTV About CopyrightsDisplaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse Operating with the Remote Control ContinuedConnecting with a USB cable The following shows the items that can be set in the projector Menu Items“Picture” menu “C.M.S.”“Screen adjustment SCR-ADJ” menu Menu Items Continued“Projector adjustment PRJ-ADJ” menu “Help” menu The items you can set with the “Help” menuMenu Selections Adjustments Using the Menu Screen2 Press Q or O and select “Picture” to adjust 1 Press MENU/HELP3 Press P or R and select “Bright” to adjust To adjust the projected image while watching it4 Press O or Q to adjust the item selected Press ENTER1 Selecting the Picture Mode Picture Adjustment “Picture” Menu3Adjusting the Color Temperature 2Adjusting the Image4Adjusting the Colors ENTER7Lamp Setting Picture Adjustment “Picture” Menu Continued5 Progressive 6 Reducing Image Noise DNR1 Setting the Resize Mode Adjusting the Projected Image “SCR - ADJ” Menu2 Adjusting the Image Position 4 Setting the On-screen Display6 Selecting the Setup Guide Adjusting the Projected Image “SCR - ADJ” Menu Continued5 Selecting the Background Image 7 Reversing/Inverting Projected ImagesAdjustment Adjusting the Projector Function “PRJ - ADJ” Menu2 Auto Power Off Function 5 Setting the Confirmationa Setting/Changing the keycode 9 Fan Mode Setting7 Audio Input XR-32X only 0 System Lock FunctionChecking the Lamp Life Status Keylock FunctionLocking the Operation Buttons on the Projector 5 Enter the same keycode in “Re- confirm”Utilizing the “Help” Menu Functions Troubleshooting with the “Help” Menu6 Press O or Q to adjust 2 Press Oor Qto select “Help”, then press ENTERAppendix MaintenanceCleaning the projector Cleaning the lensAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator If the temperature warning indicator illuminates, and the projector enters standby mode, follow the possible solutions above and then wait until the projector has cooled down completely before plug- ging in the power cord and turning the power back on. At least 10 minutes Lamp Regarding the LampHg LAMP CONTAINS MERCURY For State Lamp Disposal Information2 Disconnect the power cord Removing and Installing the Lamp Unit3 Remove the lamp unit cover Lamp unitRegarding the Lamp Continued Resetting the Lamp Timer1 Connect the power cord 2 Reset the lamp timersub 15 pin female connector Connecting Pin AssignmentsDVI-D Terminal 24 pin connector XR-32X only RS-232C Cable recommended connection D-sub 9 pin female connector Connecting Pin Assignments ContinuedComputer control RS-232C Specifications and CommandsCommunication conditions Basic formatCommands RS-232C Specifications and Commands ContinuedExample When turning on the projector, make the following setting P O W RAppendix is only for XR-32X RS-232C Specifications and Commands ContinuedAppendix Computer Computer Compatibility Chart21-24 Troubleshootingusing STANDBY/ON on Troubleshooting Continued49, 50 For SHARP Assistance Specifications Units inches mm Dimensions33, 37, 45 IndexCOMPUTER/COMPONENT input terminal
Related manuals
Manual 73 pages 59.7 Kb