Sharp XR-32X-L Picture Adjustment “Picture” Menu Continued, Progressive, Reducing Image Noise DNR

Page 46
Picture Adjustment (“Picture” Menu) (Continued)

Picture Adjustment (“Picture” Menu) (Continued)

Menu operation n Page 38

5Progressive

Selectable

Description

items

 

 

 

2D

Useful to display fast-moving images

Progressive

such as sports.

 

 

3D

Useful to display relatively slow-

Progressive

moving images such as drama and

 

documentary more clearly.

Film Mode

Reproduces the image of film source*

 

clearly. Displays the optimized image of

 

film transformed with three-two pull down

 

(NTSC and PAL60Hz) or two-two pull

 

down (PAL50Hz and SECAM) enhance-

 

ment to progressive mode images.

 

 

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

5Progressive Note

In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

When the image is blurred or noisy, switch to the optimal mode.

6Reducing Image Noise (DNR) Info

This function is available for 480I and 576I signals using COMPUTER/COMPONENT or DVI (XR-32X only) input.

This function is available for all signals with S-VIDEO and VIDEO input.

6Reducing Image Noise (DNR)

Video digital noise reduction (DNR) provides high quality images with minimal dot crawl and cross color noise.

Selectable

Description

items

 

 

 

Off

The DNR function is not activated.

Level 1

Sets the DNR level for viewing a

Level 2

clearer picture.

 

 

Set “DNR” to “Off” in the following cases: Note

Set “DNR” to “Off” in the following cases:

When the image is blurry.

When the contours and colors of moving im- ages drag.

When TV broadcasts with weak signals are projected.

7Lamp Setting

 

 

Selectable

Brightness and Power consumption

items

 

 

 

Eco + Quiet

Approx.75%

 

 

Bright

100%

 

 

7Lamp Setting Note

In the Eco + Quiet mode, the fan sound and power consumption are lower than those in the Bright mode. (Projection brightness de- creases as shown in the chart.)

42

Image 46
Contents XR-32X-L XR-32S-L SetupFeatures OPERATION MANUALModel No Serial No SPECIAL NOTE FOR USERS IN THE U.K DANGERThe supplied CD-ROM contains operation instructions in English, German, French, Spanish, Italian, Dutch, Swedish, Portuguese, Chinese, Korean and Arabic. Carefully read through the operation instructions before operating the projector Introduction 1. WARRANTY2. CONSUMER PRODUCT SAFETY ACT IntroductionENGLISHDeclaration of conformity Caution Concerning Lamp ReplacementINFORMATION PRODUCT DISPOSALFor Future Reference MaintenanceTroubleshooting IndexSetup ContentsUsing Useful FeaturesReference Appendix8. Accessories IMPORTANT SAFEGUARDS5. Cleaning 11. Power Sources20. Safety Check 18. Damage Requiring Service19. Replacement Parts 15. OverloadingCaution concerning the lamp unit Observe the following safeguards when setting up your projectorCaution concerning the setup of the projector Warning about placing the projector in a high positionUsing the projector in other countries How to Access the PDF Operation ManualsInfo Accessing the PDF Manuals for Windows For Macintosh, skip stepSupplied accessories AccessoriesOptional accessories Introduction Part Names and FunctionsProjector Top ViewUsing the Kensington Lock Part Names and Functions ContinuedRear View TerminalsFor the Left click For selecting and adjusting menu itemsFor moving the For changing the pointer or spotInserting the Batteries 2 Insert the batteriesUsable Range 1. Place the projector facing a wall or a screen Setup and ProjectionQuick Start 3. Remove the lens cap and turn the projector on5. Correct trapezoidal distortion 4. Adjust the projected image with the Setup Guide7. Turn the computer on 8. Turn the power off 6. Select the INPUT modeStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection PRJ Mode SetupIndication of the Projection Image Size and Projection Distance NORMAL Mode Setting up the Projector ContinuedScreen Size and Projection Distance STRETCH ModeConnections Connecting the Projector to Other EquipmentTerminals on the Projector Example Terminals of XR-32XConnecting the Projector to Other Equipment Continued Connections Plug the supplied power cord into the Connecting the Power CordControlling the Projector by a Computer AC socket on the rear of the projector Then plug into AC outletOperationBasic Turning the Projector On/OffTurning the Projector on Turning the Power off Putting the Projector into Standby Mode2 Adjusting the Picture Size About the Setup GuideAdjusting the Projected Image 1 Adjusting the Focus Image Projection3 Adjusting the Height 2 Press P/Q or O/R to adjust the Keystone Correction Image Projection ContinuedCorrecting Trapezoidal Distortion 1 Press KEYSTONE to enter the Keystone Correction modeDisplaying the Black Screen and Turning off the Sound Temporarily Switching the Input ModeAdjusting the Volume Press VOL +/- on the remote control orCOMPUTER Resize ModePress RESIZE About Copyrights VIDEO/DTVUsing the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse Operating with the Remote Control ContinuedConnecting with a USB cable “Picture” menu Menu ItemsThe following shows the items that can be set in the projector “C.M.S.”“Screen adjustment SCR-ADJ” menu Menu Items Continued“Projector adjustment PRJ-ADJ” menu The items you can set with the “Help” menu “Help” menu2 Press Q or O and select “Picture” to adjust Using the Menu ScreenMenu Selections Adjustments 1 Press MENU/HELP4 Press O or Q to adjust the item selected To adjust the projected image while watching it3 Press P or R and select “Bright” to adjust Press ENTERPicture Adjustment “Picture” Menu 1 Selecting the Picture Mode4Adjusting the Colors 2Adjusting the Image3Adjusting the Color Temperature ENTER5 Progressive Picture Adjustment “Picture” Menu Continued7Lamp Setting 6 Reducing Image Noise DNR2 Adjusting the Image Position Adjusting the Projected Image “SCR - ADJ” Menu1 Setting the Resize Mode 4 Setting the On-screen Display5 Selecting the Background Image Adjusting the Projected Image “SCR - ADJ” Menu Continued6 Selecting the Setup Guide 7 Reversing/Inverting Projected Images2 Auto Power Off Function Adjusting the Projector Function “PRJ - ADJ” MenuAdjustment 5 Setting the Confirmation7 Audio Input XR-32X only 9 Fan Mode Settinga Setting/Changing the keycode 0 System Lock FunctionLocking the Operation Buttons on the Projector Keylock FunctionChecking the Lamp Life Status 5 Enter the same keycode in “Re- confirm”6 Press O or Q to adjust Troubleshooting with the “Help” MenuUtilizing the “Help” Menu Functions 2 Press Oor Qto select “Help”, then press ENTERCleaning the projector MaintenanceAppendix Cleaning the lensAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator If the temperature warning indicator illuminates, and the projector enters standby mode, follow the possible solutions above and then wait until the projector has cooled down completely before plug- ging in the power cord and turning the power back on. At least 10 minutes Hg LAMP CONTAINS MERCURY For State Lamp Disposal Regarding the LampLamp Information3 Remove the lamp unit cover Removing and Installing the Lamp Unit2 Disconnect the power cord Lamp unit1 Connect the power cord Resetting the Lamp TimerRegarding the Lamp Continued 2 Reset the lamp timersub 15 pin female connector Connecting Pin AssignmentsDVI-D Terminal 24 pin connector XR-32X only Connecting Pin Assignments Continued RS-232C Cable recommended connection D-sub 9 pin female connectorCommunication conditions RS-232C Specifications and CommandsComputer control Basic formatExample When turning on the projector, make the following setting RS-232C Specifications and Commands ContinuedCommands P O W RAppendix RS-232C Specifications and Commands Continued is only for XR-32XAppendix Computer Compatibility Chart ComputerTroubleshooting 21-24using STANDBY/ON on Troubleshooting Continued49, 50 For SHARP Assistance Specifications Dimensions Units inches mm33, 37, 45 IndexCOMPUTER/COMPONENT input terminal
Related manuals
Manual 73 pages 59.7 Kb