Sharp XR-32X quick start Resize Mode, Press Resize

Image Projection (Continued)

Resize Mode

This function allows you to modify or customize the resize mode to enhance the input image. De- pending on the input signal, you can choose a desired image.

Press RESIZE.	RESIZE
• See page 43 for setting on menu screen.	button

COMPUTER

		Main resolution		NORMAL	FULL	DOT BY DOT	BORDER	STRETCH
		SVGA (800 x 600)				800 x 600
	XR-32X	XGA (1024 x 768)		1024 x 768			768 x 576	1024 x 576
		SXGA (1152 x 864)				1152 x 864
		1280 x 800		1024 x 640	1024 x 768	1280 x 800	922 x 576
		SVGA (800 x 600)
	XR-32S	XGA (1024 x 768)		800 x 600		1024 x 768	600 x 450	800 x 450
		SXGA (1152 x 864)				1152 x 864
		1280 x 800		800 x 500	800 x 600	1280 x 800	720 x 450
		Input signal			For 4:3 screen		For 16:9 screen
	Computer		Image type	NORMAL	FULL	DOT BY DOT	BORDER	STRETCH
	XR-32X	XR-32S
Resolution		Resolution
lower than		lower than
	XGA	SVGA
	XGA	SVGA			*2	*2	*1, *3	*1
		Resolution	4:3 aspect ratio
Resolution
higher than		higher
		than
	XGA
		SVGA
	SXGA (1280 ⋅ 1024)
			5:4 aspect ratio
	1280 ⋅ 720				*1		*2	*2
	1360 ⋅ 768		16:9 aspect ratio
	1366 ⋅ 768
	1280 ⋅ 768				*1		*1	*1
	1280 ⋅ 800		16:10 aspect ratio
	: Cutout area on which images cannot be projected
*1	: Area where the signals are off screen
	The Image Shift function can be used for these images.
*2 Same as NORMAL mode.
*3	For XR-30S model, you cannot select BORDER when the resolution (1280 x 1024, etc.) that the horizontal ratio is smaller than 4:3 aspect ratio is
	selected.

30