Sharp XR-32X quick start Progressive, Reducing Image Noise DNR, 7Lamp Setting

Page 46

Picture Adjustment (“Picture” Menu) (Continued)

Menu operation n Page 38

5Progressive

	Selectable	Description
	items	Description
	items

	2D	Useful to display fast-moving images
	Progressive	such as sports.

	3D	Useful to display relatively slow-
	Progressive	moving images such as drama and
		documentary more clearly.
	Film Mode	Reproduces the image of film source*
		clearly. Displays the optimized image of
		film transformed with three-two pull down
		(NTSC and PAL60Hz) or two-two pull
		down (PAL50Hz and SECAM) enhance-
		ment to progressive mode images.

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

Note

•In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

•When the image is blurred or noisy, switch to the optimal mode.

Info

•This function is available for 480I and 576I signals using COMPUTER/COMPONENT or DVI (XR-32X only) input.

•This function is available for all signals with S-VIDEO and VIDEO input.

6Reducing Image Noise (DNR)

Video digital noise reduction (DNR) provides high quality images with minimal dot crawl and cross color noise.

	Selectable	Description
	items	Description
	items

	Off	The DNR function is not activated.
	Level 1	Sets the DNR level for viewing a
	Level 2	clearer picture.

Note

Set “DNR” to “Off” in the following cases:

•When the image is blurry.

•When the contours and colors of moving im- ages drag.

•When TV broadcasts with weak signals are projected.

	7Lamp Setting

	Selectable	Brightness and Power consumption
	items	Brightness and Power consumption
	items

	Eco + Quiet	Approx. 80%

	Bright	100%

Note

•In the Eco + Quiet mode, the fan sound and power consumption are lower than those in the Bright mode. (Projection brightness de- creases as shown in the chart.)

42

Image 46

Contents XR-32X XR-32S XR-32XModel No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH A. onlySharp Electronics Corporation Sharp PROJECTOR, Model XR-32X/XR-32SOnly Using the Menu Screen For Future ReferenceContents Reference Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally See ÒReplacing the LampÓ onIf the projector starts to overheat due to setup Using the projector in other countriesTemperature monitor function Other connected equipmentAccessories Optional accessoriesPart Names and Functions ProjectorComputer Rear ViewAudio 1 input terminal Audio OUTCLICK/EFFECT COMPUTER, *DVIUP/PAGE CLICK/RETURNInserting the Batteries Usable Range Quick Start Setup and ProjectionHeight Upper side ControlStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount Setup120 Projection PRJ ModeExample Normal Mode Picture Size Projection DistanceStretch Mode Normal ModeScreen Size and Projection Distance Example Terminals of XR-32X Connecting the Projector to Other EquipmentYou may need other cables or connectors not listed below Is only for XR-32XConnecting the Projector to Other Equipment Audio XR-32S AC socket To AC outlet Power cord supplied Connecting the Power CordControlling the Projector by a Computer Turning the Projector on Lamp indicator Power indicator STANDBY/ON buttonTurning the Projector On/Off On-screen display confirmation messageAdjusting the Picture Size About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionAdjusting the Height Use the rear adjustment foot to make the projector levelCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Shrinks upper side Move the slide bar in the + directionAdjusting the Volume Switching the Input ModeOn-screen display Press Resize Resize ModeResize About Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Following shows the items that can be set in the projectorScreen adjustment SCR-ADJ menu Items you can set with the Help menu ÒHelpÓ menu nPress Qor Oand select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Example Adjusting ÒBrightÓPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterMenu operation n Picture Adjustment Picture Menu1Selecting the Picture Mode PAGE1 PAGE23Adjusting the Color Temperature 2Adjusting the Image4Adjusting the Colors Adjusting ÒHueÓ, ÒSaturationÓ, or ÒValueÓProgressive 7Lamp SettingReducing Image Noise DNR 2Adjusting the Image Position 3Keystone Correction Adjusting the Projected Image SCR ADJ Menu1Setting the Resize Mode 4Setting the On-screen Display6Selecting the Background Image 7Selecting the Setup Guide5Closed Caption Reversing/Inverting Projected Images4STANDBY Mode 1Auto Sync Auto Sync Adjustment2Auto Power Off Function 5Setting the Confirmation Sound System Sound0System Lock Function 9Fan Mode Setting7Audio Input XR-32X only Select System Lock, then press Enter or QEnter the same keycode in Re- confirm Keylock FunctionChecking the Lamp Life Status Locking the Operation ButtonsEnter button Adjustment buttons P/R/O/Q MENU/HELP button Troubleshooting with the Help MenuUtilizing the Help Menu Functions Maintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Lamp Regarding the LampReplacing the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Sub 15 pin female connector Connecting Pin AssignmentsDVI-D Terminal 24 pin connector XR-32X only RS-232C Terminal mini DIN 9 pin female connector USB Terminal Type B USB connectorCommunication conditions RS-232C Specifications and CommandsComputer control Basic formatRS-232C Specifications and Commands CommandsERR DNR Video Input Picture Mode Standard OK or ERR PAL Computer Compatibility Chart ComputerTroubleshooting 21-2449, 50 For Sharp Assistance Specifications Dimensions Index