STEP 2: CONNECTING THE SCANNER | 7 |
STEP 2: CONNECTING THE SCANNER
Your OneTouch 9020 scanner connects to any available USB 1.1 or USB 2.0 port. Check your computer’s user’s guide for its USB port locations.
Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port.
To connect the Visioneer 9020 scanner to a USB 1.1 or USB 2.0 port:
1.Turn the scanner over to see the locking tab on the bottom. Slide the locking tab to the unlocked position.
Unlocked position
Note: The locking tab protects the scanner’s scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but always remember to unlock it before scanning. The scanner will not scan when locked.