Visioneer manual To connect your Visioneer OneTouch 58XX scanner

Page 10

6VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE

To connect your Visioneer OneTouch 58XX scanner:

Note: If you have not installed the software yet, unplug the cable form the computer and install the software now. When the software installation is complete a message tells you to connect the scanner.

1.Plug the USB cable on the back of your scanner into any USB port on your computer.

If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.

2.Plug the power supply cable into the jack on the back of the scanner, then plug the power supply into a wall outlet.

Power supply

USB Cable

A progress message appears saying that the scanner has been found.

The scanner is now correctly installed.

3.To install the other software applications on the CD, reinsert the CD and wait for the opening menu to appear on the monitor. Select “MGI PhotoSuite IIISE” or “Other Great Software”. Follow the on-screen instruction to continue each installation.

4.When you are finished installing the other software, remove the CD from your computer and store it in a safe place.

Image 10

Contents Visioneer OneTouch 58XX Scanner Installation Guide P Y R I G H T I N F O R M a T I O N Table of Contents Scanning an Item Using the Twain Button Welcome WHAT’S in the BOXVisioneer Onetouch 58XX Scanner What YOU Need To use the scanner and software, you need the followingInstalling the Scanner Software To install the scanner softwareConnecting the Scanner To connect your Visioneer OneTouch 58XX scanner Checking OUT Your Scanner To check the status of the scannerIf the Scanner is not Properly Connected To connect the scanner Scan from the screen Three Ways to ScanScan with the scanner buttons Scan from the PaperPort software or other Twain softwareScanning by Pressing the Onetouch Buttons To scan by pressing a button on the scannerScanning from the Button Panel on the Screen To scan from the screenAbout the Configuration Dialog BOX Button Preconfigured SettingsAbout the Onetouch Buttons To display the Configuration dialog box About the Onetouch Buttons Getting Help in the Configuration Dialog BOX Selecting NEW Options for the ButtonsTo select new options for a scanner button Adjusting Scan Settings and page Settings Creating NEW ConfigurationsTo adjust the scan settings and page settings About the Onetouch Buttons Visioneer Onetouch 58XX Scanner Installation Guide About the Onetouch Buttons Setting Preferences To set preferencesAbout the Onetouch Buttons Visioneer Onetouch 58XX Scanner Installation Guide To set up the scanner Setting UP the ScannerScanning from the Paperport Software Scanning AN Item Using the Twain Button To scan an itemScanning from the Paper Port Software Visioneer Onetouch 58XX Scanner Installation Guide Adjusting Scanner Settings Selecting a Predefined Scanner Setting Scan Page For Default Setting To Scan DescriptionSelecting Scan Configuration Options Customizing a Scanner Setting To create a new scanner settingAdjusting the Brightness and Contrast To adjust brightness and contrastSelecting the Area of the Item YOU Want to Scan To select the area you want to scanInstallation Troubleshooting Cleaning the Scanner Glass Contacting Visioneer for Technical SupportWeight Scanning resolutionScanner dimensions Operating temperatureHOW to Uninstall Your Scanner For Windows 2000 & XPFor Windows 98, 98 SE, & ME users Uninstalling Your Paperport Software For Windows 98, 98 SE, & MEFor Windows 2000 & XP