18VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE
Note: The Configuration dialog box is also available from the scanner icon on the Windows taskbar. Click the icon to see the scanner buttons panel. Click a button on the panel with the right mouse button. (Don’t click with the left mouse button because clicking with the left mouse button starts scanning.) The Configuration dialog box appears.
CREATING NEW CONFIGURATIONS
You cannot change settings such as brightness or contrast of the preset configurations. To scan with settings other than those offered by the preset configurations, you must first create a new configuration.
To create a new configuration click the New button. You can also click Copy to copy a preset configuration, change its settings, and then save it under a new configuration name.
ADJUSTING SCAN SETTINGS AND PAGE SETTINGS
When scanning using a configuration that you created yourself, you can adjust that configuration’s scan settings and page settings. For example, if the scanned image is too dark, you can adjust the brightness of the scan setting.
Note: You cannot change the scan settings or page settings for any of the predefined scan configurations. You can only adjust settings for scan configurations that you create yourself. See the section above, “Creating New Configurations”.
To adjust the scan settings and page settings:
1.Press and hold down a button on the scanner. The Configuration dialog box appears.
The selected tab on the dialog box corresponds to the button you pressed. You can click the other tabs for the other buttons.