Visioneer OneTouch 58XX manual If the Scanner is not Properly Connected

Page 12

8VISIONEER ONETOUCH 58XX SCANNER INSTALLATION GUIDE

3.Click OK to close the dialog box. That’s it. Your scanner is ready to scan.

See “Three Ways to Scan” on page 10.

Note: The scanning lamp under the scanner’s glass needs to warm up before you can scan. A status message lets you know when the lamp is ready. The lamp then remains ready so you don’t have to wait for it to warm up each time you want to scan. To conserve electricity and prolong the life of the scanner, you can set the length of time for the lamp to remain lit before powering down. See “Setting Preferences” on page 22.

IF THE SCANNER IS NOT PROPERLY CONNECTED

If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected.

Check for one of these possible problems:

•Is a cable loose or not plugged in securely? Inspect all cable connections. Make sure all the cables are plugged in securely.

•Is the scanner’s power light on? Turn on the scanner’s power. If the light still doesn’t come on, plug the power adapter into another electrical outlet.

•Did you restart the computer after installing the software? If you didn’t restart the computer, it may not have loaded all of the software files. Try restarting your computer.

Please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems connecting the scanner. Also see “Installation Troubleshooting” on page 35 of this Guide for more information.

Image 12

Contents Visioneer OneTouch 58XX Scanner Installation Guide P Y R I G H T I N F O R M a T I O N Table of Contents Scanning an Item Using the Twain Button Welcome WHAT’S in the BOXVisioneer Onetouch 58XX Scanner What YOU Need To use the scanner and software, you need the followingInstalling the Scanner Software To install the scanner softwareConnecting the Scanner To connect your Visioneer OneTouch 58XX scanner Checking OUT Your Scanner To check the status of the scannerIf the Scanner is not Properly Connected To connect the scanner Three Ways to Scan Scan with the scanner buttonsScan from the screen Scan from the PaperPort software or other Twain softwareScanning by Pressing the Onetouch Buttons To scan by pressing a button on the scannerScanning from the Button Panel on the Screen To scan from the screenButton Preconfigured Settings About the Configuration Dialog BOXAbout the Onetouch Buttons To display the Configuration dialog box About the Onetouch Buttons Getting Help in the Configuration Dialog BOX Selecting NEW Options for the ButtonsTo select new options for a scanner button Creating NEW Configurations Adjusting Scan Settings and page SettingsTo adjust the scan settings and page settings About the Onetouch Buttons Visioneer Onetouch 58XX Scanner Installation Guide About the Onetouch Buttons Setting Preferences To set preferencesAbout the Onetouch Buttons Visioneer Onetouch 58XX Scanner Installation Guide Setting UP the Scanner To set up the scannerScanning from the Paperport Software Scanning AN Item Using the Twain Button To scan an itemScanning from the Paper Port Software Visioneer Onetouch 58XX Scanner Installation Guide Adjusting Scanner Settings Selecting a Predefined Scanner Setting Scan Page For Default Setting To Scan DescriptionSelecting Scan Configuration Options Customizing a Scanner Setting To create a new scanner settingAdjusting the Brightness and Contrast To adjust brightness and contrastSelecting the Area of the Item YOU Want to Scan To select the area you want to scanInstallation Troubleshooting Cleaning the Scanner Glass Contacting Visioneer for Technical SupportScanning resolution Scanner dimensionsWeight Operating temperatureHOW to Uninstall Your Scanner For Windows 2000 & XPFor Windows 98, 98 SE, & ME users Uninstalling Your Paperport Software For Windows 98, 98 SE, & MEFor Windows 2000 & XP