Visioneer 8820 manual Area you selected to scan

Page 58

54VISIONEER ONETOUCH 8820 SCANNER INSTALLATION GUIDE

A new Scan Info box for the area selected on the image.

The area you selected to scan.

4.If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse.

To use the pointer to drag the line, make sure the pointer button is selected at the top of the window.

5.To rotate the selected area 90 degrees, click Rotate 90 Degrees.

6.To maintain the selected area’s length-to-width relationship (known as the aspect ratio), click Maintain Aspect.

Note that as you rotate the area or maintain its aspect ratio, the width and height measurements change to reﬂect the new orientation of the image.

7.When the settings are what you want, click Scan.

8.If you want to remove the selected area and start over, click Remove on the Scan Info box.

Image 58

Contents Visioneer OneTouch Scanner P Y R I G H T I N F O R M a T I O N B L E O F C O N T E N T S Visioneer OneTouch 8820 Scanner Specifications Welcome WHAT’S in the BOXVisioneer Onetouch 8820 Scanner Visioneer ONE Touch 8820 Scanner What YOU Need Getting the Paperport Software USER’S GuideInstalling To install the PaperPort softwareVisioneer Onetouch 8820 Scanner Installation Guide Connecting the Scanner To connect the OneTouch 8820 scanner to a USB portVisioneer Onetouch 8820 Scanner Installation Guide Power cord Checking OUT Your Scanner To check the status of the scannerIf the Scanner is not Properly Connected To connect the scanner Scan from the Screen Three Ways to Scan Paper ItemsScan with the Scanner Buttons Scan from the PaperPort Software or Other Twain SoftwareScanning Paper Items with the Onetouch Buttons To scan by pressing a button on the scannerScanning from the Button Panel on the Screen To scan from the screenButton Preconﬁgured Settings About the Onetouch ButtonsBrief Explanation Scanning TransparenciesTo position a transparency for scanning Mask for 5 by Mask for 35mm film Scanning Transparencies To scan the transparency Scanning Transparencies Configuring the Scanner About the Configuration Dialog BOX To display the Conﬁguration dialog box from the Button PanelClick this Getting Help Selecting NEW Options for the Buttons To select new options for a scanner buttonAdjusting Scan Settings and page Settings Creating NEW ConfigurationsTo adjust the scan settings and page settings Visioneer Onetouch 8820 Scanner Installation Guide Configuring the Scanner Visioneer Onetouch 8820 Scanner Installation Guide Configuring the Scanner About Jpeg Compression Setting Preferences To set preferencesVisioneer Onetouch 8820 Scanner Installation Guide Configuring the Scanner To set up the PaperPort software with the scanner Scanning from the Paperport SoftwareScanning AN Item with the Twain Button To scan an itemClick AutoScan to scan with your preset scan choices To scan manually To scan automatically Click AutoScan Getting Help with the Paperport Software Adjusting the Settings on the Scan Manager PRO To adjust a settingSaving a NEW Profile To save a new proﬁleVisioneer Onetouch 8820 Scanner Installation Guide Adjusting the Resolution and Sharpness To adjust the resolution and sharpness To use the advanced optionsAdjusting the Brightness and Contrast To adjust the brightness and contrastTo use the Sampler buttons Adjusting GAMMA, SATURATION, and Color HUE To adjust the color settings Adjusting Output Size To Auto Trim an item Click Auto Trim To manually set the output size for an itemAdjusting the Settings on the Scan Manager PRO Area you selected to scan To save a custom size setting Saving a Custom SizeZooming in and OUT Scan Info BOXTo enlarge and reduce the preview image To set the Scan Manager Pro preferences Getting Help with the Scan Manager PRO Cleaning the Scanner Glass To see the Scan Manager Pro help informationWeight Scanning resolutionScanner dimensions Operating temperatureD E Page Index