78VISIONEER PATRIOT 430 SCANNER USER’S GUIDE
REPLACING THE ROLLER ASSEMBLY
After extended use, the roller may wear out and may need to be replaced. It is a
Frequent paper jams are a symptom of a worn roller assembly. A worn roller can cause documents to feed in skewed at an angle, or multiple pages to feed at the same time. A worn roller should be replaced to avoid damage to the scanner’s internal parts. Before replacing the roller you should clean it as excessive dust on the roller will make it appear worn and smooth. You cannot properly diagnose a worn roller until you have cleaned it.
1.Press the ADF cover release on the top left of the scanner body to open the Automatic Document Feeder cover.
2.Remove the scanner’s paper input tray as the roller is seated in the body of the scanner behind the tray.
3.The roller is held in place with a lock tab that rotates to lock and unlock it. To unlock the tab, rotate it upward until the small lock flange is completely free.
4.When the roller is unlocked, it can be removed from its mounting sockets. Gently press the roller to the right to free its left side. Then angle the roller to the front of the scanner until it is clear of the housing, and bring it out and away from the scanner body.