CONFIGURING THE ONETOUCH BUTTONS 31
■Straighten Image—Select this option to let the scanner automatically determine if a page is skewed, then straighten its image. The input tray paper guides should be flush to the edges of the paper to prevent paper feeding in at too great of an angle.
■Invert Image—Only available for Black&White scanning, this option reverses the black and whites of an image.
Original Image. | Inverted Image. |
■Duplex—Scan both sides of the page. If this option is not selected, the scanner will scan the face-down side of the page only.
Note: The Simplex and Duplex buttons on the scanner take precedence over the OneTouch settings. In other words, if the LED number on the scanner is configured to scan as Duplex, but you press the Simplex button, the scanner scans in Simplex, and vice versa.
■Skip Blank Originals—Skips pages that are completely blank. This option is only available for Duplex scanning.
■Color Filter—Color filter is the ability of your scanner to automatically remove a color from a scanned item. Color filter applies to Black&White or GrayScale Mode.
The original with a red watermark over black text.
The scanned item with the red filtered out.