DLP Projjjectttor—User’s Manuall
Starting and Shutting down the Projector
1.
2.
3.
4.
Connect the power cord to the projector. Connect the other end to a wall outlet. The Power LED on the projector turns on.
Turn on the connected devices.
Ensure the Power LED is on (not flashing) and then press the Power button to turn on the projector.
(If any LEDs are flashing, do not press the Power button. See “LED Error Messages” on page 45.)
The projector splash screen displays and connected devices are detected.
If the connected device is a PC, press the appropriate keys on the computer key- board to switch the display output to the projector. (Check the user manual of the PC to determine the appropriate Fn key combination to change display output.)
If more than one input device is con- nected, press the Source Data/Video buttons repeatedly to switch among de- vices.
Press Source Data to switch among a computer connected to Computer, RGBHV, WPC (wireless), or Digital.
Press Source Video to switch among a video device connected to Video,
– 14 –