DLP Projjjectttor—User’s Manuall
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
2.
3.
4.
5.
6.
7.
Press the Menu button to open the menu.
Press the cursor button to move to the Service menu.
Press the cursor button
to move down to Lamp hours reset.
Press the cursor or Enter button.
A message screen appears.
Press the cursor buttons in this order: ; ; ; .
Press the cursor button to select Lamp 1 or Lamp 2
and press Enter. |
|
Press the cursor | button |
to select Exit and press En- ter.
– 40 –