DLP |
|
|
| ||||
|
| j | t |
|
|
| |
|
|
|
|
|
|
| |
|
| ITEM |
| DESCRIPTION | DEFAULT |
| |
|
|
|
|
|
|
|
|
|
| Parity |
| Press the cursor | button to choose the parity setting for the RS232 | None |
|
|
|
|
| connector. |
|
|
|
|
|
|
|
|
|
|
|
button to display the hidden Password submenu.
Password enable | Press the cursor | button to enable or disable a user password. | Disabled |
When you enable the password, it is automatically set to the default [000000]. Use the remote control to enter a new alphanumeric pass- word. When enabled, settings in the Setup and Service menus cannot be changed.
Set Password | To set a password, press the cursor | button to select a field; press | — | ||
| the cursor | button to change values. Select OK and press Enter to |
| ||
| confirm. |
|
|
|
|
|
|
|
| ||
Change Password | To change the password, press the cursor | button to select a field; pres | — | ||
| the cursor | button to change values. Select OK and press En- |
| ||
| ter to confirm. |
|
|
|
|
|
|
| |||
Lamp hours reset | After replacing the lamp, this item should be reset. Refer to “Retting the | — | |||
| Lamp” on page 40. |
|
|
| |
|
|
| |||
Reset | Resets all items in the Service menu to default values | — | |||
– 36 –