DLP Projjjectttor – User’s Manuall
Service Menu
Press the Menu button to open the Main menu. Press the cursor 
button to move to the Service
menu. Press the cursor 
button to move up and down in the Service menu. Press 
to change values for settings.
| ITEM |
|
| DESCRIPTION | DEFAULT |
|
|
|
|
|
|
|
|
| Video information | Displays the resolution and refresh rate for RGB/DVI mode. |
|
| ||
|
| Displays the color standard for video mode. |
|
| ||
|
|
|
|
| ||
| Serial number | Displays the serial number. | These |
| ||
|
|
|
|
|
| |
|
|
|
|
|
| |
| Software version | Displays information about the firmware version. | items are |
| ||
|
|
|
|
| display |
|
|
|
|
|
|
| |
| Lamp1 hours | Press the cursor | button to see the number of hours Lamp 1 has been | only. |
| |
|
| in use for ECO and Normal mode. |
|
| ||
|
|
|
|
|
| |
| Lamp2 hours | Press the cursor | button to see the number of hours Lamp 2 has been |
|
| |
|
| in use for ECO and Normal mode. |
|
| ||
|
|
|
|
|
| |
| Auto power off | Press | to enable or disable automatic | 5 minutes |
| |
|
| specified time of inactivity. (Range: Off; 5 – 60 minutes) |
|
| ||
|
|
|
|
| ||
| Break time | Set the length of time the projector goes into standby when the Break | 0 |
| ||
|
| time button on the remote control is pressed. While in standby, the |
|
| ||
|
| break time displays on the screen. |
|
| ||
|
| Press the cursor | button to adjust the Break time. |
|
| |
|
| (Range: 0 – 180 minutes) |
|
| ||
|
|
|
|
|
|
|
Serial 
button to display the hidden Serial control submenu.
Baud rate
Press the cursor 
button to choose a baud rate for the RS232 con- nector.
9600bps
– 35 –