Runco VX-2000d manual Effects of Primary Color Hue Adjustments, Picture Adjust Advanced

Page 69

Operation

To access advanced picture quality settings, select Advanced from the Picture Adjust menu. This sub-menu presents the following options:

ICC Adjust: Select ICC Adjust from the Advanced Picture Adjust menu to customize the displayed color space. The adjustments you make here are stored in the currently-selected “Picture Memory“ preset.

For each of the six primary colors – red, yellow, green, cyan, blue and magenta – you can adjust the following:

•Hue: These slidebars adjust the red/green color hue for true color reproduction of video signals. For best results, adjust the hue while displaying an external color bar test pattern (Figure 4-4).

Changing the hue of a primary color affects the gamut (range) of possible colors. For example, changing the value for red moves the color closer to either yellow or magenta, which in turn affects all displayed colors having a red component.

Table 4-3describes the effects of adjusting the primary color hues.

Table 4-3. Effects of Primary Color Hue Adjustments

Primary Color

Press to move the color...

Press to move the color...

 

 

 

Red

Closer to magenta

Closer to yellow

 

 

 

Yellow

Closer to red

Closer to green

 

 

 

Green

Closer to yellow

Closer to cyan

 

 

 

Cyan

Closer to green

Closer to blue

 

 

 

Blue

Closer to cyan

Closer to magenta

 

 

 

Magenta

Closer to blue

Closer to red

 

 

 

•Saturation: This slidebar adjusts the color saturation level – the amount of that color in a video image. Lower settings produce less saturated colors; a setting of “-30” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.

•Intensity: This slidebar adjusts the intensity – also known as luminance – of a given color.

•Default: To reset ALL ICC settings – Hue, Saturation AND Intensity of all six colors – for the currently-selected “Picture Memory“ preset to their factory-default values, select Default (directly below the “Intensity” menu item) from the ICC Adjust menu. Then, select Yes to confirm the reset.

To reset only the Hue, Saturation OR Intensity of all six colors for the currently-selected “Picture Memory“ preset to their factory-default values, select Hue, Saturation or Intensity from the ICC Adjust menu and press ENTER. Then, select Default (the last menu item) from the ICC Adjust menu. Then, select Yes to confirm the reset.

Brilliant Color™: Select Brilliant Color™ from the Advanced Picture Adjust menu to change the BrilliantColor setting. BrilliantColor utilizes a new color-processing algorithm and system level enhancements to enable higher picture brightness while providing truer, more vibrant colors. To enable BrilliantColor, set it to On; to disable it, set it to Off.

Picture Adjust (Advanced)

ICC Adjust

 

 

 

BrilliantColor TM

 

 

 

SD Advanced Mode

 

 

 

Film Mode

 

 

 

Video NR

 

 

 

MNR

 

 

 

Sharpness Enhancement

 

 

 

Automatic Contrast

ICC Adjust

 

Default

 

 

 

 

ICC- Hue

 

 

ICC - Saturation

 

 

ICC - Intensity

 

 

Default

 

 

 

Red

0

R

R

Yellow

0

Y

Y

Green

0

G

G

Cyan

0

C

C

Blue

0

B

B

Magenta

0

M

M

Default

 

 

 

Runco VX-2000d Owner’s Operating Manual

57

Page 68 Page 70
Image 69
Page 68 Page 70
Contents VX-2000d Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation On-Screen Menus for 1080i Digital or 1080p Signals Table of Contents List of Figures List of Figures Xii About This Manual IntroductionCertain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunctionFormat screen Description, Features and BenefitsOptional Accessories VX-2000d at a Glance Controls and FunctionsVertical Lens Shift Wired IR 3.5-mm, mini phono jack RS-232C Input RJ-11 female connectorVX-2000d Rear Panel Virtualwide 2.35 is available only on the VX-2000d/CineWide DHD Controller Front PanelEnter Button DHD Controller Rear Panel Component Video RCA connectorsOutputs 1. Hdmi OUT Inputs 2. Hdmi 1 / Hdmi 2 DigitalVideo 1 / S-VIDEO Volt 750 mA Trigger OutputsComLink RS-232 Output DHD Controller/VX-2000d Remote Control VX-2000d Remote Control UnitCursor Buttons On / OFFVideo Comp ComponentAspect Ratio Selection Buttons Memory Preset ButtonsANA Anamorphic 4X3 Standard 43Only trained service personnel should use the built-in VX-2000d Built-In KeypadNot used Controls and Functions Remote Control InstallationBattery Installation OperationOther surfaces Installation specialist Quick SetupStep Procedure For Details, Refer to Projector calibration Analog 1080i Lower-resolution signalsInstallation Type InstallationConsiderations Ambient LightThrow Distance Floor Installation Ceiling InstallationVertical and Horizontal PositionOther Considerations Folded OpticsVX-2000d MountingConnections to the VX-2000d and DHD Controller You Cannot connect signal sources directly to the VX-2000dComponents to the DHD Connecting SourceController Hdmi Connections See FigureDigital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections SeePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureConnecting 12-Volt Connecting a PC orAutomation System to DHD ControllerBuilt-in IR sensor on the DHD Controller is disabled Connecting an External IR Receiver to the DHD ControllerAdjusting the Picture Orientation Turning on the PowerConnecting to AC Power You must enter a passcode to access the Service menuPrimary Lens Adjustments Focus and ZoomVertical Lens Shift It is extremely important that the primary lens is properly Installing and Adjusting the CineWide Anamorphic LensAdjusting the Lens Height Y Installation Operation Service ISF PresetsInput Source Aspect RatioMain Menu Input SourceAspect Ratio Aspect Ratio Description Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionISF Presets ISF Night ISF Day Custom Save Factory Default ISF PresetsInformation Serial Num Hardware Firmware 0100.001A Date Oct 19You must enter a passcode to access the Calibration menu Low-lights Offset provides finer adjustmentCalibration Gain/Offset Refer to ISF Night Display Color, above Button takes you from top to bottom in the left column, then ServiceTip ADC Bandwidth Auto YPbPr Input Resolution HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVAuto On-Screen Menus for 1080i Digital or 1080p Signals Advanced Picture AdjustWhite Balance HD/RGB AdjVX-2000d Main Menu 1080i Digital or 1080p Sources Only Language Picture AdjustRemote Control Key Picture Memory Description Setting ISF NightBrightness slightly RoomPicture Adjust Advanced Effects of Primary Color Hue AdjustmentsWhite Balance White BalanceHD/RGB Adj Overscan 480i/480p signals only Refer to Overscan onBelow to Off, the LED function is automatically set to On Lamp Hours read-onlyRefer to Lamp Hours onOSD Language setting Orientation Refer to Adjusting the Picture Orientation onRefer to page 59 is automatically set to On Runco Technical SupportLamp Replacement Maintenance and TroubleshootingSymptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Maintenance and Troubleshooting Serial Command Syntax RS-232 Connection and Port ConfigurationCommand Value Description Min/max Stored? Power On/Off CommandsVIRTUAL235 YES Aspect Ratio CommandsBrightness Iheight Bkgnd Command Parameter Value Description Min/max RatioEnter key VX-2000d Specifications SpecificationsIndustry-Standard Specifications Home Theater Calibration SpecificationsPower Requirements DimensionsDHD Controller Specifications VX-2000d Dimensions VX-2000d DimensionsPage Runco CL-810 Owner’s Operating Manual RUMA-009330
Related manuals
Manual 90 pages 18.52 Kb

VX-2000d specifications

The Runco VX-2000d is a premium home theater projector that combines cutting-edge technology with a commitment to delivering extraordinary image quality. Renowned among enthusiasts for its exceptional performance, the VX-2000d caters to both the casual viewer and the most discerning cinephile, making it a standout option in the world of home entertainment.

One of the primary features of the Runco VX-2000d is its native 1080p resolution, which ensures that images are crisp, detailed, and vibrant. With a resolution of 1920 x 1080 pixels, this projector capitalizes on High Definition content, enabling viewers to experience movies and shows as the directors intended. Coupled with high brightness levels and a remarkable contrast ratio, the VX-2000d exhibits deep blacks and brilliant colors, enhancing the overall viewing experience.

The VX-2000d incorporates advanced DLP (Digital Light Processing) technology that provides remarkable color accuracy and consistency across a variety of content. The use of the latest imaging chips and sophisticated optics creates lifelike imagery that draws viewers into the action. Additionally, this projector supports a wide color gamut, allowing it to reproduce a broader range of colors for enhanced realism.

Another highlight of the Runco VX-2000d is its sophisticated lens system. The projector features a high-quality glass lens that minimizes optical distortion while ensuring sharp focus across the entire image. Its motorized lens shift, zoom, and focus functionalities allow for easy installation and flexibility in positioning the projector within various home theater setups.

The VX-2000d also supports various video formats, including 24p film and 1080p/60, making it versatile for different types of content. Also, with its built-in proprietary video processing technology, the projector upscales standard-definition and high-definition content to optimized viewing experiences.

Furthermore, the Runco VX-2000d is equipped with a range of connectivity options, including HDMI, Component, and VGA inputs, ensuring compatibility with numerous devices such as Blu-ray players, gaming consoles, and streaming devices.

With its combination of excellent build quality, robust performance, and impressive features, the Runco VX-2000d remains a top choice for enthusiasts seeking an unparalleled home theater experience. Whether enjoying action-packed films or serene nature documentaries, this projector immerses viewers in a cinematic journey that captivates the senses.
Top Page Image Contents