Runco VX-2000d manual Refer to page 59 is automatically set to On, Runco Technical Support

Page 72

Operation

most accurate colors. If it does not, try the other choices and select the one that does.

HDMI Black Level: This control compensates for incoming elevated black levels present in certain video signals. When you set it to Auto, the VX-2000d automatically determines the best setting according to the incoming video signal type. For some types of video, you may want to override the setting. Set it to 0 IRE if blacks appear elevated (dark gray). If blacks appear “crushed” (too dark), set it to 7 IRE.

Background: Select Background from the Options menu, then press or to select the image background – solid blue, solid black or the Runco logo welcome screen. The Background appears when no incoming signal is present.

Power Save: Select Power Save from the Options menu to access the power management features of the VX-2000d.

•RS-232C Port: When this option is set to On, the RS-232 port is always active and consuming power, even when the projector is in standby mode. When set to Off, the RS-232 port is inactive and does not consume power when the projector is in standby mode.

Always set this option to On. Doing otherwise may disrupt

Caution

communication between the projector and DHD Controller.

 

•Auto Power Off: When this option is set to On, the projector enters standby mode after 15 minutes of inactivity (no input signal). Five minutes before this is to occur, the message “Enter STANDBY mode in 5 min.” appears on-screen. This message updates to indicate the amount of time before the projector enters standby mode.

When set to Off, the projector remains in the “power on” state regardless of the presence or absence of an input signal.

Note

When you set the Auto Power Off function to Off, the LED function

(refer to page 59) is automatically set to On.

Baud Rate: Select Baud Rate from the Options menu, then press the or button to select the projector’s RS-232 baud rate. This function is used to change the transfer rate of the RS-232 connection between the projector and the DHD Controller. The default setting is 9600 bps. Do not change it unless specifically instructed to do so by

Runco Technical Support.

Fan Mode: If the projector is being used in a high-altitude environment, use the Fan Mode control to prevent it from overheating. Set it to High Altitude (2) to run the fan at high speed; set it to Normal (1) to run the fan at normal speed.

Orientation: Refer to Adjusting the Picture Orientation on page 32.

Factory Default: To reset all projector settings (including image settings) back to their factory defaults, choose Factory Default from the Options menu. When the confirmation message appears, select All Reset to perform the reset or Return to cancel. This action is not undoable. Proceed with caution!

Note

The Factory Default command does not reset the Lamp Timer or

OSD Language setting.

60

Runco VX-2000d Owner’s Operating Manual

Page 71 Page 73
Image 72
Page 71 Page 73
Contents VX-2000d Page TWO Year Limited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation On-Screen Menus for 1080i Digital or 1080p Signals Table of Contents List of Figures List of Figures Xii Introduction About This ManualUsing This Manual Certain featuresSignificance. They also provide supplemental information Degrade performance or cause a malfunctionDescription, Features and Benefits Format screenOptional Accessories Controls and Functions VX-2000d at a GlanceVertical Lens Shift Wired IR 3.5-mm, mini phono jack RS-232C Input RJ-11 female connectorVX-2000d Rear Panel DHD Controller Front Panel Virtualwide 2.35 is available only on the VX-2000d/CineWideEnter Button Component Video RCA connectors DHD Controller Rear PanelOutputs 1. Hdmi OUT Inputs 2. Hdmi 1 / Hdmi 2 DigitalVideo 1 / S-VIDEO Volt 750 mA Trigger OutputsComLink RS-232 Output VX-2000d Remote Control Unit DHD Controller/VX-2000d Remote ControlOn / OFF Cursor ButtonsVideo Comp ComponentMemory Preset Buttons Aspect Ratio Selection ButtonsANA Anamorphic 4X3 Standard 43Only trained service personnel should use the built-in VX-2000d Built-In KeypadNot used Controls and Functions Installation Remote ControlBattery Installation OperationOther surfaces Quick Setup Installation specialistStep Procedure For Details, Refer to Projector calibration Analog 1080i Lower-resolution signalsInstallation Installation TypeConsiderations Ambient LightThrow Distance Ceiling Installation Floor InstallationVertical and Horizontal PositionFolded Optics Other ConsiderationsMounting VX-2000dYou Cannot connect signal sources directly to the VX-2000d Connections to the VX-2000d and DHD ControllerConnecting Source Components to the DHDController Hdmi Connections See FigureDigital DTV RGB or Component Video Connections See Digital DTV RGB or Component Video ConnectionsAnalog Computer RGB Connections See Figure Personal ComputerComposite/S-Video/Component Video Connections See Figure DVD Player, VCR Satellite Receiver Laser Disc etcConnecting a PC or Connecting 12-VoltAutomation System to DHD ControllerConnecting an External IR Receiver to the DHD Controller Built-in IR sensor on the DHD Controller is disabledTurning on the Power Adjusting the Picture OrientationConnecting to AC Power You must enter a passcode to access the Service menuPrimary Lens Adjustments Focus and ZoomVertical Lens Shift Installing and Adjusting the CineWide Anamorphic Lens It is extremely important that the primary lens is properlyAdjusting the Lens Height Y Installation Operation ISF Presets ServiceInput Source Aspect RatioMain Menu Input SourceAspect Ratio Aspect Ratio Settings Aspect Ratio DescriptionPicture Picture Brightness Contrast Color Tint SharpnessTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Input Position Left/Right Up/Down Width Height OverscanISF Presets ISF Presets ISF Night ISF Day Custom Save Factory DefaultInformation Serial Num Hardware Firmware 0100.001A Date Oct 19You must enter a passcode to access the Calibration menu Low-lights Offset provides finer adjustmentCalibration Gain/Offset Refer to ISF Night Display Color, above Service Button takes you from top to bottom in the left column, thenTip ADC Bandwidth Auto YPbPr Input Resolution HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVAuto On-Screen Menus for 1080i Digital or 1080p Signals Picture Adjust AdvancedWhite Balance HD/RGB AdjVX-2000d Main Menu 1080i Digital or 1080p Sources Only Picture Adjust LanguagePicture Memory Description Setting ISF Night Remote Control KeyBrightness slightly RoomEffects of Primary Color Hue Adjustments Picture Adjust AdvancedWhite Balance White BalanceOverscan 480i/480p signals only Refer to Overscan on HD/RGB AdjBelow to Off, the LED function is automatically set to On Lamp Hours read-onlyRefer to Lamp Hours onOrientation Refer to Adjusting the Picture Orientation on OSD Language settingRefer to page 59 is automatically set to On Runco Technical SupportMaintenance and Troubleshooting Lamp ReplacementTroubleshooting Tips Symptom Possible Causes SolutionTroubleshooting Chart Maintenance and Troubleshooting RS-232 Connection and Port Configuration Serial Command SyntaxCommand Value Description Min/max Stored? Power On/Off CommandsAspect Ratio Commands VIRTUAL235 YESBrightness Iheight Bkgnd Command Parameter Value Description Min/max RatioEnter key Specifications VX-2000d SpecificationsHome Theater Calibration Specifications Industry-Standard SpecificationsPower Requirements DimensionsDHD Controller Specifications VX-2000d Dimensions VX-2000d DimensionsPage RUMA-009330 Runco CL-810 Owner’s Operating Manual
Related manuals
Manual 90 pages 18.52 Kb

VX-2000d specifications

The Runco VX-2000d is a premium home theater projector that combines cutting-edge technology with a commitment to delivering extraordinary image quality. Renowned among enthusiasts for its exceptional performance, the VX-2000d caters to both the casual viewer and the most discerning cinephile, making it a standout option in the world of home entertainment.

One of the primary features of the Runco VX-2000d is its native 1080p resolution, which ensures that images are crisp, detailed, and vibrant. With a resolution of 1920 x 1080 pixels, this projector capitalizes on High Definition content, enabling viewers to experience movies and shows as the directors intended. Coupled with high brightness levels and a remarkable contrast ratio, the VX-2000d exhibits deep blacks and brilliant colors, enhancing the overall viewing experience.

The VX-2000d incorporates advanced DLP (Digital Light Processing) technology that provides remarkable color accuracy and consistency across a variety of content. The use of the latest imaging chips and sophisticated optics creates lifelike imagery that draws viewers into the action. Additionally, this projector supports a wide color gamut, allowing it to reproduce a broader range of colors for enhanced realism.

Another highlight of the Runco VX-2000d is its sophisticated lens system. The projector features a high-quality glass lens that minimizes optical distortion while ensuring sharp focus across the entire image. Its motorized lens shift, zoom, and focus functionalities allow for easy installation and flexibility in positioning the projector within various home theater setups.

The VX-2000d also supports various video formats, including 24p film and 1080p/60, making it versatile for different types of content. Also, with its built-in proprietary video processing technology, the projector upscales standard-definition and high-definition content to optimized viewing experiences.

Furthermore, the Runco VX-2000d is equipped with a range of connectivity options, including HDMI, Component, and VGA inputs, ensuring compatibility with numerous devices such as Blu-ray players, gaming consoles, and streaming devices.

With its combination of excellent build quality, robust performance, and impressive features, the Runco VX-2000d remains a top choice for enthusiasts seeking an unparalleled home theater experience. Whether enjoying action-packed films or serene nature documentaries, this projector immerses viewers in a cinematic journey that captivates the senses.
Top Page Image Contents