Runco VX-2000d manual Home Theater Calibration Specifications, Industry-Standard Specifications

Page 84

Specifications

Table 7-1. VX-2000d Specifications (continued)

Brightness and Contrast

Cinema Standards Measurement System (CSMS)

(variable, depending on

Specifications

RVR calibration):

-

Brightness: 15.6 to 22.4 foot-Lamberts (fL)

 

-

Contrast Ratio: 211:1 to 229:1

 

These measurements are taken from the projector in a controlled,

 

home theater environment. All measurements are made to

 

ANSI/NAPM IT7.228-1997 specifications using the Photo Research

 

PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter,

 

Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The

 

projector is calibrated to a color temperature of 6,500K and has a

 

minimum of 150 hours of usage.

 

The foot-Lambert (fL) is the unit of measurement used in commercial

 

movie theaters to express image brightness at the screen surface. The

 

Society of Motion Picture and Television Engineers (SMPTE) specifies

 

16 fL as the target image brightness for film-based projectors using an

 

open gate (without film in the projector). More importantly, today

 

SMPTE specifies 12 fL as the target image brightness in Digital

 

Cinema theaters. The foot-Lambert measurement is dependent on

 

screen size, screen gain and projector light output.

 

Home Theater Calibration Specifications

 

-

Light Output: 418 to 600 ANSI Lumens

 

-

Contrast Ratio: 211:1 to 229:1

 

These specifications are obtained by calibrating the projector as

 

described above for CSMS measurements.

 

Industry-Standard Specifications

 

-

Light Output: 1500 ANSI Lumens

 

-

Contrast Ratio: 2700:1 to 3300:1

 

These are typical projector brightness and contrast specifications

 

found in most companies’ sales literature. Runco includes these

 

measurements in its literature to allow for direct comparison with other

 

manufacturers’ projectors. These measurements are typically taken at

 

9,000K to 13,000K to get expected performance data when the

 

projector is used in professional, commercial and industrial displays.

 

 

Power Requirements:

100 to 240 VAC (auto-sensing), 50/60 Hz, 375 Watts

 

 

Operating Environment:

40°F to 95°F (5°C to 35°C), 0% to 90% humidity

 

(non-condensing)

 

 

Dimensions:

See Figure 7-1

 

 

Weight (without lens):

50 lbs. (22.68 kg)

 

 

Regulatory Approvals:

Complies with FCC, CE C-Tick

 

 

Limited Warranty:

Projector: Two (2) years parts and labor from the date of

 

delivery to the end user.

 

Lamp: 1000 hours or six (6) months, whichever comes first.

 

 

 

Specifications are subject to change without notice.

72

Runco VX-2000d Owner’s Operating Manual

Page 83 Page 85
Image 84
Page 83 Page 85
Contents VX-2000d Page TWO Year Limited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Operation On-Screen Menus for 1080i Digital or 1080p Signals Table of Contents List of Figures List of Figures Xii Introduction About This ManualUsing This Manual Certain featuresSignificance. They also provide supplemental information Degrade performance or cause a malfunctionDescription, Features and Benefits Format screenOptional Accessories Controls and Functions VX-2000d at a GlanceVertical Lens Shift Wired IR 3.5-mm, mini phono jack RS-232C Input RJ-11 female connectorVX-2000d Rear Panel DHD Controller Front Panel Virtualwide 2.35 is available only on the VX-2000d/CineWideEnter Button Component Video RCA connectors DHD Controller Rear PanelOutputs 1. Hdmi OUT Inputs 2. Hdmi 1 / Hdmi 2 DigitalVideo 1 / S-VIDEO Volt 750 mA Trigger OutputsComLink RS-232 Output VX-2000d Remote Control Unit DHD Controller/VX-2000d Remote ControlOn / OFF Cursor ButtonsVideo Comp ComponentMemory Preset Buttons Aspect Ratio Selection ButtonsANA Anamorphic 4X3 Standard 43Only trained service personnel should use the built-in VX-2000d Built-In KeypadNot used Controls and Functions Installation Remote ControlBattery Installation OperationOther surfaces Quick Setup Installation specialistStep Procedure For Details, Refer to Projector calibration Analog 1080i Lower-resolution signalsInstallation Installation TypeConsiderations Ambient LightThrow Distance Ceiling Installation Floor InstallationVertical and Horizontal PositionFolded Optics Other ConsiderationsMounting VX-2000dYou Cannot connect signal sources directly to the VX-2000d Connections to the VX-2000d and DHD ControllerConnecting Source Components to the DHDController Hdmi Connections See FigureDigital DTV RGB or Component Video Connections See Digital DTV RGB or Component Video ConnectionsAnalog Computer RGB Connections See Figure Personal ComputerComposite/S-Video/Component Video Connections See Figure DVD Player, VCR Satellite Receiver Laser Disc etcConnecting a PC or Connecting 12-VoltAutomation System to DHD ControllerConnecting an External IR Receiver to the DHD Controller Built-in IR sensor on the DHD Controller is disabledTurning on the Power Adjusting the Picture OrientationConnecting to AC Power You must enter a passcode to access the Service menuPrimary Lens Adjustments Focus and ZoomVertical Lens Shift Installing and Adjusting the CineWide Anamorphic Lens It is extremely important that the primary lens is properlyAdjusting the Lens Height Y Installation Operation ISF Presets ServiceInput Source Aspect RatioMain Menu Input SourceAspect Ratio Aspect Ratio Settings Aspect Ratio DescriptionPicture Picture Brightness Contrast Color Tint SharpnessTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Input Position Left/Right Up/Down Width Height OverscanISF Presets ISF Presets ISF Night ISF Day Custom Save Factory DefaultInformation Serial Num Hardware Firmware 0100.001A Date Oct 19You must enter a passcode to access the Calibration menu Low-lights Offset provides finer adjustmentCalibration Gain/Offset Refer to ISF Night Display Color, above Service Button takes you from top to bottom in the left column, thenTip ADC Bandwidth Auto YPbPr Input Resolution HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUVAuto On-Screen Menus for 1080i Digital or 1080p Signals Picture Adjust AdvancedWhite Balance HD/RGB AdjVX-2000d Main Menu 1080i Digital or 1080p Sources Only Picture Adjust LanguagePicture Memory Description Setting ISF Night Remote Control KeyBrightness slightly RoomEffects of Primary Color Hue Adjustments Picture Adjust AdvancedWhite Balance White BalanceOverscan 480i/480p signals only Refer to Overscan on HD/RGB AdjBelow to Off, the LED function is automatically set to On Lamp Hours read-onlyRefer to Lamp Hours onOrientation Refer to Adjusting the Picture Orientation on OSD Language settingRefer to page 59 is automatically set to On Runco Technical SupportMaintenance and Troubleshooting Lamp ReplacementTroubleshooting Tips Symptom Possible Causes SolutionTroubleshooting Chart Maintenance and Troubleshooting RS-232 Connection and Port Configuration Serial Command SyntaxCommand Value Description Min/max Stored? Power On/Off CommandsAspect Ratio Commands VIRTUAL235 YESBrightness Iheight Bkgnd Command Parameter Value Description Min/max RatioEnter key Specifications VX-2000d SpecificationsHome Theater Calibration Specifications Industry-Standard SpecificationsPower Requirements DimensionsDHD Controller Specifications VX-2000d Dimensions VX-2000d DimensionsPage RUMA-009330 Runco CL-810 Owner’s Operating Manual
Related manuals
Manual 90 pages 18.52 Kb

VX-2000d specifications

The Runco VX-2000d is a premium home theater projector that combines cutting-edge technology with a commitment to delivering extraordinary image quality. Renowned among enthusiasts for its exceptional performance, the VX-2000d caters to both the casual viewer and the most discerning cinephile, making it a standout option in the world of home entertainment.

One of the primary features of the Runco VX-2000d is its native 1080p resolution, which ensures that images are crisp, detailed, and vibrant. With a resolution of 1920 x 1080 pixels, this projector capitalizes on High Definition content, enabling viewers to experience movies and shows as the directors intended. Coupled with high brightness levels and a remarkable contrast ratio, the VX-2000d exhibits deep blacks and brilliant colors, enhancing the overall viewing experience.

The VX-2000d incorporates advanced DLP (Digital Light Processing) technology that provides remarkable color accuracy and consistency across a variety of content. The use of the latest imaging chips and sophisticated optics creates lifelike imagery that draws viewers into the action. Additionally, this projector supports a wide color gamut, allowing it to reproduce a broader range of colors for enhanced realism.

Another highlight of the Runco VX-2000d is its sophisticated lens system. The projector features a high-quality glass lens that minimizes optical distortion while ensuring sharp focus across the entire image. Its motorized lens shift, zoom, and focus functionalities allow for easy installation and flexibility in positioning the projector within various home theater setups.

The VX-2000d also supports various video formats, including 24p film and 1080p/60, making it versatile for different types of content. Also, with its built-in proprietary video processing technology, the projector upscales standard-definition and high-definition content to optimized viewing experiences.

Furthermore, the Runco VX-2000d is equipped with a range of connectivity options, including HDMI, Component, and VGA inputs, ensuring compatibility with numerous devices such as Blu-ray players, gaming consoles, and streaming devices.

With its combination of excellent build quality, robust performance, and impressive features, the Runco VX-2000d remains a top choice for enthusiasts seeking an unparalleled home theater experience. Whether enjoying action-packed films or serene nature documentaries, this projector immerses viewers in a cinematic journey that captivates the senses.
Top Page Image Contents