Vizio CCU-11B manual Connections

Page 10

7-2. Connections

A.Connect 4-pin connector from TBM-11 (Terminal module) to P2 connection socket on the CCU-11B.

B.RM1 terminals on TBM-11 are for the door remote control relay contacts and RM2 terminals on TBM-11 are for the power ON/OFF remote control or press to talk remote control relay contacts.

(Please refer to the following diagram.)

	DOOR
YEL
RM1	AC
ORG
RED
RM2	AC
BRN

In the case of power ON/OFF remote control.

— 9 —

Image 10

Contents TOA EXES-1000 Intercom System Contents Functions Which Require Additional Units Unit Model No Remarks FunctionPrecautions for Installation of CCU-11B Program Switch for No ProgrammingConfirmation tone Initial CCU-11B SET UPFirst installation? Yes Is Executive Priority necessary?OFF Station no Programming for Each Function Continuously called station numberAscertain holding tone Sub-station Number Sub-station Number SW-A-3 on SW-B-2 OFF Remote Control Relays RY1 & RY2 on CCU-11BSW-A-3 OFF Opening Then touch dialConnections Programming List for Functions Station NoKOBE, Japan